TDK introduces revolutionary MEMS-based CO2 gas sensor platform


https://www.electronics-lab.com/tdk-introduces-revolutionary-mems-based-co2-gas-sensor-platform/

TDK Corporation announces the InvenSense TCE-11101, a miniaturized ultra-low-power MEMS gas sensor platform for direct and accurate detection of CO2 in-home, automotive, IoT, healthcare, and other applications. The TCE-11101 introduces new technology that expands TDK’s sensor leadership into new applications and solutions, as part of the new SmartEnviroTM family. Its small size and low power […]

Sipeed’s MAIX-II Dock Development Kit for AI-specific Applications


https://www.electronics-lab.com/sipeeds-maix-ii-dock-development-kit-for-ai-specific-applications/

MAIX-II Dock Development Kit for Sipeed’s second-generation MAIX-II core module has a built-in NPU (Neural Processing Unit) for AI-specific applications. The module runs in a complete Linux environment with edge computing features to improve response time and reduce the bandwidth. Hence, the module specializes in deep learning and AIoT functions. MAIX-II module is an Allwinner […]

LG Introduces LG8111 AI Chip And Development Kit for On-device AI


https://www.electronics-lab.com/lg-introduces-lg8111-ai-chip-and-development-kit-for-on-device-ai/

LG Electronics has introduced a highly-integrated LG8111 AI Chip together with a corresponding Eris Reference Board for edge AI Processing. The LG8111 AI chip for on-device AI inference is equipped with an LG-specific AI processor that can copy the neural network of the human brain and process the deep learning algorithm efficiently. The SoC supports hardware […]

TPSM82810 – 2.75-V to 6-V, 4-A step-down module with adjustable-frequency & tracking


https://www.electronics-lab.com/tpsm82810-2-75-v-to-6-v-4-a-step-down-module-with-adjustable-frequency-tracking/

TPSM8281x is a family of pin-to-pin 3-A and 4-A compatible high efficiency and easy to use synchronous step-down DC/DC power modules with integrated inductors. They are based on a fixed-frequency peak current-mode control topology. They are used in telecommunication, test and measurement, and medical applications with high power density and ease of use requirements. Low […]

TinyPocketRadio – FM Stereo Radio based on ATtiny13A


https://www.electronics-lab.com/tinypocketradio-fm-stereo-radio-based-on-attiny13a/

Stefan Wagner published another project on github.com. He writes: TinyPocketRadio is a simple FM stereo radio based on ATtiny13A and RDA5807MP. It’s powered by a CR2032 coin cell battery and can drive 32 Ohm headphones via the 3.5 mm audio plug. The board size is 38 x 23 mm. It has a power switch and […]

EPC2218 Enhancement-Mode GaN Power Transistors


https://www.electronics-lab.com/epc2218-enhancement-mode-gan-power-transistors/

EPC’s 3.2 mΩ, 100 V, 231 Apulsed GaN transistor provides power efficiency and switching frequency EPC’s EPC2218 transistors and development/evaluation boards supply 100 V, 60 A, and 231 APULSED enhancement-mode GaN FETs. The transistors are only supplied in passivated die form with solder bars and a die size of 3.5 mm x 1.95 mm. The EPC2218 is ideal for 48 VOUT […]

ON Semiconductor NCN51xxASGEVB KNX Evaluation Boards


https://www.electronics-lab.com/on-semiconductor-ncn51xxasgevb-knx-evaluation-boards/

ON Semiconductor NCN51xxASGEVB evaluation boards are Arduino-compatible shields that enable rapid prototyping with a microcontroller of choice. These evaluation boards incorporate all the external components necessary for operating the transceivers. The NCN51xASGEVB boards come in three variants such as the NCN5110ASGEVB, NCN5121ASGEVB, and NCN5130ASGEVB. The NCN51xx series of KNX transceivers handle the low-level communication necessary to […]

New Triple Output DC Power Supplies are cTUVus Certified


https://www.electronics-lab.com/new-triple-output-dc-power-supplies-are-ctuvus-certified/

B&K Precision, a leading designer and manufacturer of reliable, cost-effective test and measurement instruments, today announces the 9140 Series Triple Output Multi-Range DC Power Supplies. With three isolated and individually controllable outputs, the 9140 (32 V, 8 A) and 9141 (60 V, 4 A) provide up to 300 W of clean power with low ripple […]

60W LED Dimmer for 12V LEDs using 555 Timer


https://www.electronics-lab.com/60w-led-dimmer-for-12v-leds-using-555-timer/

The project shown here is a cheap 60W LED dimmer for 12V LEDs/12V LED strips. The circuit is based on the very popular, versatile, and low-cost 555 timer IC, NE555 IC generates a PWM signal and IRF540 MOSFET works as output driver for the LEDs. In this circuit the 555 IC used in an astable […]

+/-18V Isolated DC-DC Converter Dual Supply Output from USB 5V Power Input


https://www.electronics-lab.com/project/18v-isolated-dc-dc-converter-dual-supply-output-from-usb-5v-power-input/

This is a mini DC-DC converter with dual output from single 5V DC supply or USB power source (e.g., +/-18V from 5V/USB). The mini board will fit into small space and perform with high efficiency. Basically, the circuit transfers power from 5V/USB to the output side +/-18V with high isolation, without a direct connection between […]