UP Xtreme: Powering Intelligent Surveillance Solutions
https://www.electronics-lab.com/xtreme-powering-intelligent-surveillance-solutions/
Many developers and users of security solutions are looking for ways to get more out of their surveillance systems by deploying intelligent edge computing platforms. UP Xtreme, from AAEON’s UP Board division, is being deployed along with technology from partners including Intel®, Milestone and SAIMOS® to bring Smart Surveillance to these customers with the UP […]
nrfsec, For Unlocking Any Protected nRF51-Series System-on-Chip for Debug
https://www.electronics-lab.com/nrfsec-unlocking-protected-nrf51-series-system-chip-debug/
Loren Browman, a security analyst recently published a guide to automated unlocking of Nordic Semiconductor’s nRF51-series systems-on-chips (SoCs) which claims to be protected, enabling a full memory dump or interactive debugging regardless of protection settings. In a blog piece for security firm Optiv, Loren Browman writes “Recently, while conducting an assessment for a product based […]
Teensy 4.1 is the first Microcontroller Board to come with 100Mbit Ethernet coupled with 600MHz 32- bit microprocessor
https://www.electronics-lab.com/teensy-4-1-first-microcontroller-board-come-100mbit-ethernet-coupled-600mhz-32-bit-microprocessor/
Teensy is another line of microcontroller boards designed to offer maximum I/O capabilities backed up by fully featured software libraries to run on Arduino. Loved by makers around the world for a number of reasons, these Arduino compatible boards have proven to be an astounding development platform in a small form capable of implementing many […]
New Sensor Board from Parametric Circuits provides a whole new level of Integration
https://www.electronics-lab.com/new-sensor-board-parametric-circuits-provides-whole-new-level-integration/
Sensor boards are manufactured to provide engineers with the ideal platform for developing projects and designs that detect or measure temperature, pressure, humidity, color, motion, and even physical location. They offer necessary support circuitry that allows for the full utilization of sensors for demonstration and evaluation. While there’s been a wide range of available sensor […]
ATtiny10 Development Board with USB-C and Micro USB
https://www.electronics-lab.com/attiny10-development-board-usb-c-micro-usb/
If you like using the simplest possible chip for each of your applications, then the ATtiny10 development board will strongly appeal to you. The ATtiny10 development board from Bobricius is a low-power high-performance 6-pin processor equipped with both USB-C and Micro-USB for powering purposes only. True to its name “tiny”, the chip is about the […]
Elektor Article: LED Booster for Microcontrollers
https://www.electronics-lab.com/elektor-article-led-booster-microcontrollers/
There’s many a time when you want to connect a white LED to a microcontroller operating from a 3 V supply voltage. Unfortunately, this doesn’t work and your nice white LED only lights up feebly or not at all. Why does it work perfectly with red and green LEDs, but not with white? A bit […]
Ohm’s Law
https://www.electronics-lab.com/article/ohms-law/
Introduction The fundamental relation between the current, voltage, and resistance is known as Ohm’s law and is probably the most famous and elementary physical law of electronics. It is in 1827 when the German physicist Georg Simon Ohm publishes for the first time in the book “Die galvanische Kette, mathematisch bearbeitet” (in English: The mathematical […]
DipDuino – is an Arduino in 0.3in DIP form
https://www.electronics-lab.com/dipduino-arduino-0-3in-dip-form/
DipDuino is an Arduino in 0.3in DIP form. It runs the Atmega328P. Uses an onboard CP2104 to program itself and comes pre-programmed with Arduino Bootloader. Will act as a Arduino Pro or Pro Mini. Available in Tindie Store. The DipDuino is a FULL ARDUINO (Minus the A6 & A7 pins). Comes in 5v and 3.3v […]
TinySolder – T12 Soldering Station based on ATtiny13a
https://www.electronics-lab.com/tinysolder-t12-soldering-station-based-attiny13a/
TinySolder is a simple T12 Quick Heating Soldering Station based on the ATtiny13a featuring in 700 bytes of code: Temperature measurement of the tip Direct control of the heater Temperature control via potentiometer Handle movement detection (by checking ball switch) Time driven sleep/power off mode if iron is unused (movement detection) TinySolder – T12 Soldering […]
Broadcom AFBR-S4N33C013 is a silicon photo multiplier
https://www.electronics-lab.com/broadcom-afbr-s4n33c013-silicon-photo-multiplier/
The Broadcom® AFBR-S4N33C013 is a single silicon photomultiplier (SiPM) used for ultra-sensitive precision measurement of single photons. The active area is 3.0 × 3.0 mm2. The high packing density of the single chips is achieved using through-silicon-via (TSV) technology and a chip-sized package (CSP). Larger areas can be covered by tiling multiple AFBR-S4N33C013 CSPs almost […]