inCharge 6 – The Swiss Army Knife of Cables
https://www.electronics-lab.com/incharge-6-swiss-army-knife-cables/
All the cables you need in a tiny EDC keyring cable. The search for the perfect cable is over. You probably own a few battery-powered devices, maybe one or two phones, a camera, Bluetooth headset, etc…, and each requires a different cable. It’s also easy to forget bringing the right cable, and once your device […]
Audio DAC for Raspberry Pi
https://www.electronics-lab.com/audio-dac-raspberry-pi/
Small single-board computers like the Raspberry Pi are ideal for use as small stand-alone network audio players. With Volumio and other specialized Linux distributions, putting together an audio player is remarkably easy. And as Elektor staff member Ton Giesberts shows in the referred article, you can also use this approach to build a high-end audio […]
A powerful, open hardware ECP5 FPGA dev board
https://www.electronics-lab.com/powerful-open-hardware-ecp5-fpga-dev-board/
ULX3S is a fully open source, compact, robust, and affordable FPGA dev board equipped with a balanced selection of additional components and expansions. Although it was designed primarily as a teaching tool for mastering the principles of digital circuit design, ULX3S incorporates a wide array of features and interfaces that allow it to serve as […]
The Cortex® M4F: Enabling next-generation real-time processing in i.MX8QM SMARC System on Module
https://www.electronics-lab.com/cortex-m4f-enabling-next-generation-real-time-processing-mx8qm-smarc-system-module/
iWave systems recently launched a new SMARC System on Module (SOM) based on the powerful NXP® i.MX 8QuadMax applications processors. This high performance SOM features an intelligent blend of MPUs+MCU power in a single device and integrates heterogeneous multicore 64 bit ARM® processors (Dual Cortex® A72@ 1.8 GHz + Quad Cortex® A53 @ 1.2 GHz and […]
4.3″ gen4 Series Intelligent Display Module with DIABLO16 Graphics Controller
https://www.electronics-lab.com/4-3-gen4-series-intelligent-display-module-diablo16-graphics-controller/
The gen4 4.3” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems. The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality. These specific gen4 modules feature a 4.3” colour TFT LCD display, and come […]
Phase Splitter
https://www.electronics-lab.com/article/phase-splitter/
Introduction Often, not only the amplitude of the signal is interesting to transform, such as amplifiers do, but also its phase. Bipolar transistors can indeed be used in the design of a device called a phase splitter. In the very first section, general notions about the phase and the properties of a phase splitter are […]
Dual frequency GNSS module enables sub-1m accuracy
https://www.electronics-lab.com/dual-frequency-gnss-module-enables-sub-1m-accuracy/
OriginGPS has announced its first dual-frequency GNSS module, the ORG4600-B01, which will enable customers to build systems with sub-1m accuracy without implementing external components. by Jean-Pierre Joosting @ www.mwee.com Measuring just 10- x 10-mm, the ORG4600-B01 module supports L1 + L5 GNSS reception with one RF port, enabling the use of a low-cost, dual-band antenna […]
New Kontron Motherboards “Designed by Fujitsu”
https://www.electronics-lab.com/new-kontron-motherboards-designed-fujitsu/
Kontron, a leading global provider of IoT/Embedded Computing Technology (ECT), introduces motherboards “Designed by Fujitsu” including the form factors (Thin) Mini-ITX, µATX, Mini-STX, and ATX based on the latest Intel® platforms. As a result of the acquisition of Fujitsu’s products, production facilities and engineering in Augsburg, Germany, Kontron has expanded its embedded motherboard product portfolio. […]
SEGGER Embedded Studio now supports DAP-Link
https://www.electronics-lab.com/segger-embedded-studio-now-supports-dap-link/
The latest release of Embedded Studio, SEGGER’s cross-platform IDE, can now debug software on evaluation boards equipped with a DAP-Link (CMSIS-DAP) debug interface. This new feature is included in the ARM and Cortex-M editions on all supported host platforms: Windows and Linux 64- and 32-bit, as well as macOS (including Catalina). The software to access […]
Rigol DG952 2-Ch 50MHz Arbitrary Waveform Function Generator
https://www.electronics-lab.com/rigol-dg952-2-ch-50mhz-arbitrary-waveform-function-generator/
The Rigol DG952 50MHz Dual Channel Function Generator, although value-priced, provides highly-accurate 16-bit standard and arbitrary waveforms point by point from its huge 16Mpt memory. Most other AWGs are only 14-bit or less. With a sampling rate of 250MSa/sec, this versatile signal source produces precise, very low jitter waveforms (High frequency stability: ±1 ppm; low […]