High-resolution motor-driver board targets open-source 3D-printer
https://www.electronics-lab.com/high-resolution-motor-driver-board-targets-open-source-3d-printer/
STMicroelectronics’ EVALSP820-XS motor-driver board brings ST’s industrial-control expertise to the RAMPS (RepRap Arduino Mega Pololu Shield) open-source 3D-printer platform, enabling 3D printer makers to unleash the full potential of their machines for faster printing and smoother surface finish. The RAMPS modular platform is making Fused Filament Fabrication (FFF) 3D printing accessible to makers, small businesses, and home […]
Making your first Circuit Board – Getting started with PCBway [Part 2]
https://www.electronics-lab.com/making-first-circuit-board-getting-started-pcbway-part-2/
This is the next part of “MAKING YOUR FIRST PRINTED CIRCUIT BOARD – GETTING STARTED WITH PCBWAY [Part 1]“ Series. Designing your PCB When you design your first PCB, there will be several steps that you will need to take before you sent the design files off to the manufacturer for manufacturing. Create The Schematic […]
CANable: the open source USB to CAN adapter
https://www.electronics-lab.com/canable-open-source-usb-can-adapter/
An open-source USB to CAN adapter: It supports CAN bit-rates of up to 1 Mbit/s. The product comes with an open-source SocketCAN driver software. It features a Micro-USB connector and a 4-pin screw terminal with CAN_H, CAN_L, 5-V supply, and ground. The CANable device is a hardware clone of Eric Evenchick’s CANtact project, an open-source […]
UP AI Edge – an edge platform works across Intel CPU, GPU, VPU and FPGA
https://www.electronics-lab.com/ai-edge-edge-platform-works-across-intel-cpu-gpu-vpu-fpga/
UP Bridge the Gap – a brand of AAEON Europe – is proud to bring its latest innovation at Kicksarter. Introducing UP AI Edge: an x86 computing platform works across Intel CPU, GPU,VPU and FPGA to enable Artificial Intelligence on the Edge. Most IT solutions available today are focused on connecting Edge devices to the […]
iTRUBEC Minimonitor v1.0 – IoT for Bees
https://www.electronics-lab.com/itrubec-minimonitor-v1-0-iot-bees/
A beehive (and not only) monitor (temperature, atmospheric pressure, humidity and noise level) the size of a box of matches. iTRUBEC Minimonitor started as a side project to another our project – iTRUBEC – beehive heating – published recently. The objective was to build a tiny device capable to monitor beehive (and not only a […]
Arduino Unveils its First FPGA Board with MKR Vidor 4000, and an updated Uno WiFi Board
https://www.electronics-lab.com/arduino-unveils-first-fpga-board-mkr-vidor-4000-updated-uno-wifi-board/
One of the most significant players of the open-hardware movement, The Arduino (Arduino Foundation) has finally released a set of exciting new boards after long time. The Arduino movement at some point had some legal troubles which affected the pace of hardware development, and after getting resolved, this pace is rising back and surely more […]
Mi Mini PC – The World’s Most Powerful Pocket-Sized PC
https://www.electronics-lab.com/mi-mini-pc-worlds-powerful-pocket-sized-pc/
Change is constant and accepted by most people if not all. The Evolution of the digital computer has been continuous, technological advancement brought minicomputers, microcomputers, and even notepads. It also brought the invention of smartphones and tablets, but all these gadgets which have been in existence have different issues such as size, weight, ability to […]
Making Your First Printed Circuit Board – Getting Started With PCBWAY [PART 1]
https://www.electronics-lab.com/making-first-printed-circuit-board-getting-started-pcbway-part-1/
If you are into electronics, PCBs (Printed Circuit Board) are some of the most common things you will see. These boards make our lives easier by eliminating all those connecting wires and breadboards. If properly designed, it will reduce the size of your device and it can look very professional. Making a professional board could […]
ATtiny85 20MHz Internal Clock
https://www.electronics-lab.com/attiny85-20mhz-internal-clock/
Here is a new tutorial from technoblogy.com on how to run ATtiny85 with internal 20MHz clock. The ATtiny85 is rated at a maximum clock speed of 20MHz at 4.5 – 5.5V. For some applications it would be nice to get the maximum speed without needing to buy a 20MHz crystal, or tie up two I/O […]
ONYXX – A new wireless charger with 5000mAh capacity
https://www.electronics-lab.com/onyxx-new-wireless-charger-5000mah-capacity/
NEW YORK, NY May 9th, 2018 — CheeNYC an NYC based company, are launching a new Wireless Charger/Power Bank named ONYXX. It will be the first Wireless Charger designed for outdoor use with water and dust resistant components starting at under $90. For active lifestyle or just casual spill during your office work, ONYXX will […]