Overview of the Tektronix MSO58 8-Channel 6.25GS/s 2GHz Mixed-Signal Oscilloscope
https://www.electronics-lab.com/overview-tektronix-mso58-8-channel-6-25gss-2ghz-mixed-signal-oscilloscope/
Overview of the Tektronix MSO58 8-Channel 6.25GS/s 2GHz Mixed-Signal Oscilloscope – [Link]
What is Embedded FPGA — Known as eFPGA
https://www.electronics-lab.com/embedded-fpga-known-efpga/
Today’s market requirements change faster than the typical development time for a new device or the ability of designers of SoCs to know. To solve this problem, FPGAs/MCUs are used so developers can change the configuration/firmware later. As known, MCU IP is static and you can’t change the silicon design (RTL design) after fabrication. FPGA […]
Open-V, The Open Source RISC-V 32bit Microcontroller
https://www.electronics-lab.com/open-v-open-source-risc-v-32bit-mcu/
Open source has finally arrived to microcontrollers. Based on RISC-V instruction set, a group of doctoral students at the Universidad Industrial de Santander in Colombia have been working on an open source 32-bit chip called “Open-V“. Onchip, the startup of the research team, is focusing on integrated systems and is aiming to build the first system-on-chip designed in Colombia. The […]
Post Tweets With Your Raspberry Pi
https://www.electronics-lab.com/post-tweets-with-raspberry-pi/
Raspberry Pi is famous for its great computing strength and ability to run the Linux operating system. In today’s tutorial, you’ll learn how to make your Raspberry Pi tweet. You can add extra features to this project to post tweets autonomously if any specific event occurs. Let’s get started. Required Parts You’ll need following parts […]
A Brief Introduction to CE Mark on Products
https://www.electronics-lab.com/brief-introduction-ce-mark-products/
When you flip any electronic device (your TV screen, laptop, power supply, computer mouse, …etc) you will see lots of marks. These marks are conformity marking for certain quality and technical standards such as: CE, FCC and UL. Today we are going to investigate more about the CE mark. What is CE? CE is a […]
Plug And Debug With ScanaQuad SQ200 Logic Analyzer and Signal Generator
https://www.electronics-lab.com/plug-debug-scanaquad-sq200-logic-analyzer-signal-generator/
The ScanaQuad 200 by Ikalogic is a high-performance 4-channel logic analyzer and digital pattern generator. It is designed to be the best companion of a hobbyist when working on serial protocols like UART, SPI, I2C, 1-Wire, USB, I2S, CAN, LIN, RS232, RS485, and more. With the ScanaQuad 200 Logic Analyzer, you can capture signals, you can play them […]
Opendime v2 – Genuine Verified Bitcoin Credit Stick
https://www.electronics-lab.com/opendime-v2-genuine-verified-bitcoin-credit-stick/
Opendime announced their USB stick that allows you to spend Bitcoin like a dollar bill: Opendime is a small USB stick that allows you to spend Bitcoin like a dollar bill. Pass it along multiple times. Connect to any USB to check balance. Unseal anytime to spend online. Hopefully everyone who needed an Opendime for […]
42 of the Most Useful Raspberry Pi Commands
https://www.electronics-lab.com/42-useful-raspberry-pi-commands/
circuitbasics.com has posted an article about the most usefull Raspberry Pi commands: Sometimes it’s hard to keep track of all the Raspberry Pi commands you use, so I created a list of some of the most useful and important ones that will make using Linux on the Raspberry Pi a lot easier. But first a quick note about user privileges… […]
3.5A Unipolar Stepper Motor Driver
https://www.electronics-lab.com/3-5a-unipolar-stepper-motor-driver/
Compact Unipolar stepper motor driver can drive unipolar motor up to 3.5A and supply range 10 To 50V DC. This compact board is based on STK672-440BN IC from ON semiconductor. The STK672-440BN is a hybrid IC for use as a unipolar, 2-phase stepper motor driver with PWM current control with Micro-stepping. Note: This Board can […]
3.5A Unipolar Stepper Motor Driver
https://www.electronics-lab.com/project/3-5a-unipolar-stepper-motor-driver/
Compact Unipolar stepper motor driver can drive unipolar motor up to 3.5A and supply range 10 To 50V DC. This compact board is based on STK672-440BN IC from ON semiconductor. The STK672-440BN is a hybrid IC for use as a unipolar, 2-phase stepper motor driver with PWM current control with Micro-stepping. Note: This Board can […]