Half-Bridge with Over Current Protection – 400V/1A
https://www.electronics-lab.com/project/half-bridge-with-over-current-protection-400v-1a/
The Half-Bridge Driver project presented here is designed to support load power supplies of up to 400V DC. The board features the IRS2890DS Half-Bridge Gate Driver IC, which is paired with two IGBTs rated at 8A/650V, conveniently mounted on the board. The board features overcurrent shutdown. Barrier Terminal Blocks provided for load and input supply. […]
Half-Bridge Driver Module – 48V/5A Load
https://www.electronics-lab.com/project/half-bridge-driver-module-48v-5a-load/
This Half-Bridge Driver Module is a low-voltage power management solution designed to drive a wide range of applications, including DC motors, DC-DC converters, and other inductive and resistive loads. The module is engineered to operate within a load supply voltage range of up to 48V DC and can handle a maximum load current of 5A, […]
Current-to-Voltage Converter Circuit for Audio DACs
https://www.electronics-lab.com/project/current-to-voltage-converter-circuit-for-audio-dacs/
Many high-performance audio digital-to-analog converters (DACs) feature a current output that must be converted into a voltage output for use with audio amplifiers. In premium automotive audio applications, for example, it is critical that the DAC signal-to-noise ratio (SNR) and total harmonic distortion plus noise (THD+N) performance is not compromised by the current-to-voltage (I-V) output […]
Smart Soldering Iron Controller – Precision Heater Controller
https://www.electronics-lab.com/project/smart-soldering-iron-controller-precision-heater-controller/
This smart soldering iron controller is a sophisticated system that provides precise temperature control and real-time temperature monitoring. This innovative solution ensures that the temperature at the tip of the soldering iron is consistently maintained, allowing for precise and reliable soldering. Arduino example code is provided below. Features Power Supply 24V DC (Range 13V to […]
OLEDUINO – Arduino compatible OLED display
https://www.electronics-lab.com/project/oleduino-arduino-compatible-oled-display/
This OLEDUINO Board is a compact, feature-rich board that incorporates the ATMEGA328 Arduino microcontroller, a 0.96-inch 128×64 OLED display (SSD136), a 5V regulator, and headers connectors that provide access to all Arduino I/O lines. Notably, the board’s size is smaller than the OLED display, and an onboard connector is supplied for bootloader burning and Arduino […]
Toybrick TB-RK3576D SBC with Rockchip RK3576, Mali-G52, and 4K Display Support
https://www.electronics-lab.com/toybrick-tb-rk3576d-sbc-with-rockchip-rk3576-mali-g52-and-4k-display-support/
The Toybrick TB-RK3576D is a compact Single Board Computer (SBC) designed for high-performance computing and multimedia applications. It features dual Gigabit Ethernet ports, a PCIe slot, and multiple display interfaces, making it suitable for networked systems, industrial use, and graphics-intensive tasks. At its core is the Rockchip RK3576 processor, which combines a quad-core Cortex-A72 and a […]
SECO SOM-SMARC-Genio510 and Genio700 Modules with MediaTek Genio 510 and 700 SoCs for Edge AI Applications
https://www.electronics-lab.com/seco-som-smarc-genio510-and-genio700-modules-with-mediatek-genio-510-and-700-socs-for-edge-ai-applications/
SECO has unveiled two new SMARC system-on-modules: the SOM-SMARC-Genio510 and SOM-SMARC-Genio700, powered by MediaTek Genio 510 and 700 SoCs featuring Cortex-A78 and Cortex-A55 cores. These industrial-grade modules are designed for high power efficiency, delivering reduced energy consumption even during intensive edge AI workloads. They are well-suited for applications such as retail touchscreens, intelligent industrial sensors, […]
Pimoroni Presto Beta is An RP2350 Powered 4-Inch Touchscreen Display with RGB Backlighting and Wireless Connectivity for IoT Applications
https://www.electronics-lab.com/pimoroni-presto-beta-is-an-rp2350-powered-4-inch-touchscreen-display-with-rgb-backlighting-and-wireless-connectivity-for-iot-applications/
Pimoroni has recently launched the Presto Beta Edition, a versatile, connected desktop display companion powered by an RP2350 chip. It features a 4-inch square touchscreen with a 480×480 resolution, housed in an elegant black aluminium stand with RGB backlighting. This is designed as a programmable display and can show calendar updates, weather reports, photos, digital […]
SECO and Raspberry Pi Partner on 10.1-inch HMI Display Featuring Raspberry Pi CM5 Module
https://www.electronics-lab.com/seco-and-raspberry-pi-partner-on-10-1-inch-hmi-display-featuring-raspberry-pi-cm5-module/
SECO has partnered with Raspberry Pi to design a 10.1-inch Human-Machine Interface (HMI) panel display based on the upcoming Raspberry Pi CM5 compute module. The collaboration also involves integrating SECO’s Clea IoT software with the Raspberry Pi 5 and exploring IoT and edge AI applications. The CM5 compute module maintains the CM4 form factor but […]
EDATEC ED-IPC3100: Raspberry Pi CM5 and Broadcom BCM2712-Based Industrial Computer with 4G LTE and 4K HDMI
https://www.electronics-lab.com/edatec-ed-ipc3100-raspberry-pi-cm5-and-broadcom-bcm2712-based-industrial-computer-with-4g-lte-and-4k-hdmi/
The EDATEC ED-IPC3100 industrial computers feature a durable metallic case designed to withstand external shocks and support DIN-rail installation. Built around the latest Raspberry Pi Compute Module 5 (CM5) powered by the Broadcom BCM2712 SoC, the ED-IPC3100 offers advanced connectivity options, including dual-band 2.4GHz/5GHz Wi-Fi, Bluetooth, and 4G LTE. The system provides up to 16GB […]