Synchronous Boost Converter 12V Input to 24V Output @ 2A

---

https://www.electronics-lab.com/project/synchronous-boost-converter-12v-input-to-24v-output-2a/

This project is a synchronous boost converter based on the LM5122 IC. It converts a 12V input to a 24V output capable of delivering up to 2A. It features high-current connectors and a power indicator LED.

24V Boost Converter from 4.5V to 20V Input

---

https://www.electronics-lab.com/project/24v-boost-converter-from-4-5v-to-20v-input/

The project presented here is a boost converter with 24V output from 4.5V to 20V DC Input. The project is built using an LT8357 chip and configured as a boost converter. Under voltage lockout, and soft-start are a few key features of the project. LED D1 indicates the output, and screw terminals are provided for […]

Step Up DC-DC Converter – 24V/10mA Output from 12V DC Input – Compatible to TO220 LDO

---

https://www.electronics-lab.com/project/step-up-dc-dc-converter-24v-10ma-output-from-12v-dc-input-compatible-to-to220-ldo/

The project demonstrated here is a small-size solution, high-efficiency, low-cost, and low-EMI step-up DC/DC module for LDO regulator replacement. This small size module helps save on solution size and cost while also eliminating the need for a heatsink. The module takes up the same amount of space as a TO-220 package and is pin-to-pin compatible […]

24V to 48V @ 1.5A Step-Up DC-DC Converter using LM2588

---

https://www.electronics-lab.com/project/24v-48v-1-5a-step-dc-dc-converter-using-lm2588/

This is another boost DC-DC Converter that provides 48V DC output from 24V DC input with a load current of up to 1.5A. The board is very small. Booster is based on LM2588 IC from Texas Instruments. The LM2588 regulator integrated circuit is specifically designed for fly-back, step-up (Boost), and forward converter. Board has minimum […]