Wireless Light Level Monitor – Transmitter Unit

---

https://www.electronics-lab.com/project/wireless-light-level-monitor-transmitter-unit/

Wireless Light Monitor: OPT101 sensor, ATMEGA328, and 433MHz RF. Displays 0-100% light on a 0.96" OLED.

434Mhz Arduino Wireless Analog Sensor Data Receiver

---

https://www.electronics-lab.com/project/434mhz-arduino-wireless-analog-sensor-data-receiver/

This Wireless Analog Sensor Receiver is a complementary component to the Wireless Analog Sensor Transmitter, designed to receive and process data transmitted from the transmitter. This Receiver project is compatible with the 434Mhz Arduino Wireless Analog Sensor Transmitter The receiver system consists of: 434MHz RF ASK Receiver module: This module receives the data transmitted from […]

One Channel RF Remote Relay Switch

---

https://www.electronics-lab.com/project/one-channel-rf-remote-relay-switch/

The project described here is one Channel RF remote receiver Relay board. The project is built using LICAL-EDC-DS001 chip from LINX. The board consists of Encoder/Decoder chip, 433Mhz RF Receiver module, 10 x jumpers to set the address, a Relay to drive the output, U2 5V regulator, header connector for data outputs for controlling external […]

8 Channel RF Remote Transmitter with Holtek and Serial Protocol

---

https://www.electronics-lab.com/project/8-channel-rf-remote-transmitter-with-holtek-and-serial-protocol/

The project described here is an 8 Channel RF remote transmitter This transmitter is built using LICAL-EDC-DS001 chip from LINX. The project consists of the Encoder/Decoder chip, a 433Mhz RF module as a wireless link, 8 x tactile switches for operations, 10 x jumpers to set the transmitter address. This DS series decoder/encoder chip is […]