10 Minutes Timer for AC Loads
https://www.electronics-lab.com/project/10-minutes-timer-for-ac-loads/
The project described here is a 10-minute timer using an Arduino microcontroller, capable of driving AC loads up to 30A. The timer’s progress is visually represented by 10 LEDs, which light up sequentially, each for 1 minute, totaling 10 minutes. The project is powered by a single 230V AC supply, converted to 12V DC for […]
Smart Power Module for 3-Phase Motor – 5A
https://www.electronics-lab.com/project/smart-power-module-for-3-phase-motor-5a/
This is a Smart power module project designed for Small Power AC Motors. The FNB40560 chip is the heart of the project. A compact inverter project is ideal for small power motors such as fans and pumps. H-bridge configuration can also be created for low current high-voltage brushed DC motors. The Inverter project supports loads […]
3 Phase IPM Module for Small Power AC Motor
https://www.electronics-lab.com/project/3-phase-ipm-module-for-small-power-ac-motor/
This is a 3-Phase Inverter Driver project designed for Small Power AC Motors. The project is built using FSB50550AT IPM chip. This compact and reliable inverter project is ideal for small power motors such as fans and pumps. An H-bridge configuration can also be created for low current high-voltage brushed DC motors. The Inverter board […]
3 Phase Inverter for Low Power AC Motor
https://www.electronics-lab.com/project/3-phase-inverter-for-low-power-ac-motor/
This is a 3-Phase Inverter Driver project designed for Low Power AC Motor. The FSB50450AS chip is the heart of the project. A compact inverter project is ideal for small power motors such as fans and pumps. An H-bridge configuration can also be created for low-current high-voltage brushed DC motors. The Inverter project supports loads […]
3 Phase (3 Wire) EMI Filter – 480VAC
https://www.electronics-lab.com/project/3-phase-3-wire-emi-filter-480vac/
The project presented here is a 3 Phase (3Wire) EMI Power line filter which reduces electromagnetic interference and noise conducting in to and out of equipment power lines. These EMI filters can prevent electromagnetic noise of equipment going into the power line and disturb the proper functions of other devices such as communication devices, digital […]
AC Voltage Zero Cross Detector
https://www.electronics-lab.com/project/ac-voltage-zero-cross-detector/
This project provides AC voltage zero-cross timing detection and a DC voltage after diode rectification with high accuracy. Possible applications for such circuits are AC motor controllers, AC lamp controllers, AC Dimmer Controllers, Home Appliances. The circuit outputs a zero-cross signal from 90 Vac to 264 Vac input. The project is based on BM1Z102FJ chip […]
Development board for Brushless Motor, DC Brushed Motor, AC Motors (Pre-Driver)
https://www.electronics-lab.com/project/development-board-for-brushless-motor-dc-brushed-motor-ac-motors-pre-driver/
The project described here is a pre-driver for brushless motors with a hall sensor. The board incorporates many features like current monitor, fault, speed control, direction control motor start/stop using tactile switches, various function LEDs, 6 PWM LEDs. By combining it with a hybrid IC or IPM module large size high voltage and high current […]
Low Profile 2 Channel Solid State Relay for AC Loads
https://www.electronics-lab.com/project/low-profile-2-channel-solid-state-relay-for-ac-loads/
This project offers an extremely compact solution for interfacing 2 high voltage resistive or inductive loads. At a low profile, this is the most compact & versatile optically isolated 2 channel solid state relay system. The circuit consists of 2x Triacs and isolated Triac drivers. The circuit is compatible with TTL input signals and controls […]