3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver

3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver

Driving a low current 3 phase brushless Sensorless DC motor is very easy with this project. This Full-wave BLDC driver project is capable to drive low current brushless fan motor without a hall sensor. 180° sinusoidal drive, high torque output, and silent drive are a few key features...

Continue Reading
1.247
Views
1 Comments
BLDC Motor and DC Brushed Motor Driver 

BLDC Motor and DC Brushed Motor Driver 

This BLDC motor driver board is equipped with a smart IFX007T half-bridge. The BLDC motor control project is capable to drive one BLDC motor. Alternatively, it can be used to drive one or two bi-directional DC motors (H-Bridge configuration, cascaded to support the second motor) or up...

Continue Reading
1.528
Views
0 Comments
Signal Conditioner for Sensorless BLDC Operations

Signal Conditioner for Sensorless BLDC Operations

This is a back EMF signal conditioning circuit that can be used to develop high-voltage sensorless motor drivers. When a sensorless algorithm is used to control the BLDC motor speed, the Back EMF (BEMF) signals are used. Based on zero crossing of BEMF signals, motor commutation is...

Continue Reading
1.289
Views
0 Comments
Development board for Brushless Motor, DC Brushed Motor, AC Motors (Pre-Driver)

Development board for Brushless Motor, DC Brushed Motor, AC Motors (Pre-Driver)

The project described here is a pre-driver for brushless motors with a hall sensor. The board incorporates many features like current monitor, fault, speed control, direction control motor start/stop using tactile switches, various function LEDs, 6 PWM LEDs. By combining it with a...

Continue Reading
1.842
Views
0 Comments
600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)

600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)

This compact IPM module circuit provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. The circuit is based on FNA23060 chip which integrates the optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also...

Continue Reading
2.516
Views
0 Comments
15V to 60V – Three-Phase Brushless DC Motor Pre-Driver

15V to 60V – Three-Phase Brushless DC Motor Pre-Driver

The project presented here is a three-phase BLDC motor pre-driver. The project consists of 3x half-bridge IR2101 driver IC and 6 channel high current N-MOSFETS. The project can be configured as 3 independent half-bridges H-bridge for a brushed DC motor, or a single high current...

Continue Reading
3.814
Views
1 Comments
Sensorless FOC 3 Phase Low Power Brushless BLDC Motor Driver

Sensorless FOC 3 Phase Low Power Brushless BLDC Motor Driver

Driving a 3-phase brushless DC motor is very easy with this project. It is a simple and easy-to-build project that requires only a few external components. The circuit is based on AMT49400 IC which is an advanced 3-phase, Sensorless, brushless DC (BLDC) motor driver with integrated...

Continue Reading
4.020
Views
3 Comments
Intelligent Power Module (IPM) Board for Brushless Motors

Intelligent Power Module (IPM) Board for Brushless Motors

Intelligent Power Module (IPM) board has been designed using FSBS5CH60 IC from Fairchild, which provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI...

Continue Reading
20.943
Views
24 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives