DC Motor Position Control Using Potentiometer – Arduino Compatible
https://www.electronics-lab.com/project/dc-motor-position-control-using-potentiometer-arduino-compatible/
The project presented here is an Arduino-compatible motor control board. The board consists of an ATMEGA328 microcontroller, LMD18201 H-Bridge, and 2 x potentiometers. This closed-loop servo system provides position control using a feedback potentiometer mounted on the output shaft of the gearbox and provides position control by turning the shaft of the reference potentiometer, the […]
Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible
https://www.electronics-lab.com/project/brushed-dc-motor-controller-using-rotary-encoder-arduino-compatible/
This DC Motor controller provides direction and speed control of brushed DC Motor using Rotary Encoder. This is Arduino compatible hardware that consists of LMD18201 DC motor driver chip, Atmega328 microcontroller, Rotary Encoder, L317 regulator, and other components. Hardware offers easy control of brushed DC motor up to 3A with speed, direction, and brake control. […]
Brushed DC Motor Speed and Direction Controller Using Joystick
https://www.electronics-lab.com/project/brushed-dc-motor-controller-using-joystick/
This DC Motor controller provides direction and speed control of a brushed DC motor using a Joystick. This is an Arduino compatible open-source hardware with various applications. It can be used to control scissor lift motor, Linear actuator, Camera slider, camera pan-tilt head, curtain motor, power window motor, robotics, smart furniture automation, hospital furniture automation, […]
Brushed DC Motor Controller Using Infra-Red Remote
https://www.electronics-lab.com/project/brushed-dc-motor-controller-using-infra-red-remote/
This project enables the user to control a Brushed DC Motor using an Infra-Red Remote Control, thus controlling speed, direction, and also brake of DC Motor is possible. It’s an Arduino compatible open-source hardware that helps you develop many DC Motor control applications. The user has to write the code as per the application requirement. […]