Light - Power Control Projects

4 Channel Large Current Relay Board

4 Channel Large Current Relay Board

4-Channel Relay Board is a simple and convenient way to interface 4 relays for switching application in your project.


0 comments Tested
PWM Solenoid and Valve Driver using DRV103

PWM Solenoid and Valve Driver using DRV103

This tiny module is a PWM Solenoid and Valve driver using the Texas instrument’s DRV103 low-side DMOS power switch, employing a pulse-width modulated (PWM) output.


27 comments Tested
4 Channel RF Remote Controller

4 Channel RF Remote Controller

4 Channel RF remote built using PT2262 and PT2272-M4 IC from Princeton technology.


13 comments Tested
Heat Activated Cooling Fan Controller

Heat Activated Cooling Fan Controller

Heat activated cooling fan controller is a simple project which operates a brushless fan when the temperature in a particular area goes above a set point, when temperature return normal, fan automatically turns off.


4 comments Tested
One Channel InfraRed Remote Controller

One Channel InfraRed Remote Controller

One Channel Infra-Red Remote and receiver with onboard Relay provides normally open and normally closed output.


9 comments Tested
4 Channel Relay Board

4 Channel Relay Board

Quad Channel Relay Board is a simple and convenient way to interface 4 relays for switching application in your project.


24 comments Tested
Dark Sensitive Switch – LED Light

Dark Sensitive Switch – LED Light

Dark activated LED light is a simple project which operates a LED when the light falling on the LDR goes below a set point.


1 comment Tested
Dark Sensitive Lamp ON/OFF Controller

Dark Sensitive Lamp ON/OFF Controller

Dark Sensitive Lamp controller project switches a load connected to it when light falling on LDR (Light Dependent Resistor) goes bellow set point.


7 comments Tested
Over Current Protection Switch

Over Current Protection Switch

Current Sensing Switch is designed to operate a Relay Contact when there is a DC current through the sense resistor exceeds the set point, Set point adjustable from 1A to 3Amp using on board potentiometer.


0 comments Tested
Isolated Digital ON/OFF Switch for AC load

Isolated Digital ON/OFF Switch for AC load

ON/OFF AC load Controller project offers simple On/Off Switch Control with two tact switch.


0 comments Tested
AC Solid state Relay for Inductive Load

AC Solid state Relay for Inductive Load

AC Solid state Relay for Inductive Load offers simple On/Off type Switch Control with TTL compatible input signal.


4 comments Tested
DC Output Solid State Relay

DC Output Solid State Relay

DC Output Solid State Relay 10Amps 60V DC (Optically Isolated Input) This project has been designed around TLP250/352 which is Opto-Coupler IGBT/MOSFET Gate Driver from Toshiba and Mosfet IRFP260 from IR, This relay consists of optically isolated gate driver and low impedance Mosfet.


12 comments Tested