Projects Projects
12-75V Input to 10V Output DC-DC Buck Converter
This is a versatile synchronous Buck DC/DC converter built using the LM5007 chip.
10μA-10mA Low-Side Current Sensor
This single-supply, low-side, current-sensing solution accurately detects load current between 10μΑ and 10mA.
Precision Switched Integrator Transimpedance Amplifier
This project is based on IVC102 chip from Texas Instruments.
12V Step-Up DC-DC Converter from 1.8V to 5V Input
This is a DC/DC converter that combines a traditional voltage feedback loop and a unique current feedback loop to operate as a constant-current, constant-voltage source.
Signal Conditioner for Piezoelectric Sensors
This is a simple signal conditioner circuit for Piezoelectric sensors.
Capacitive Humidity Sensor to Analog Output Converter
The project presented here is an analog capacitive humidity sensor converter board suitable for various humidity measurement tasks.
Phase-Shifted Full-Bridge Controller with Synchronous Rectification using UCC28950
This Phase-shifted Full-Bridge controller with synchronous rectification carrier board contains all of the features necessary to implement a phase-shifted full-bridge with a synchronous rectification topology power converter.
Linear Capacitive Proximity Sensor
The project presented here is an analog capacitive proximity sensor.
Robotics Arm Controller using PS3 Wireless Remote
This project enables the user to control an RC servo-based robotics arm wirelessly.
Bluetooth Robot Car Controller using ESP32
This wireless robot car controller board is built using an ESP32 BT/Wi-Fi module, 2 x H-Bridges, 3.3V regulator.
H-Bridge for High Power Brushed DC Motor with Current Sense
This H-bridge board is an easy-to-use brushed DC motor driver that can handle large-size motors such as wheelchair motors, and winch motors.
Isolated RS-232 to RS-485 Signaling Converter
This project provides a solution for converting RS232 signaling to RS485 signaling.