Projects Projects
3 Phase Inverter for Low Power AC Motor
This is a 3-Phase Inverter Driver project designed for Low Power AC Motor.
2.1 Channel Audio Processor with Subwoofer Output
This board is an Audio Processor built using PT2033 chip audio processor designed for versatile applications.
2 Channel MOSFET Module
This is a low profile and small size two-channel MOSFET board that can drive loads up to 2 x 3A.
Thermal Mass Air Flow Sensor – Constant Temperature Anemometer
The CTA mode (Constant Temperature Anemometer) consists of a simple feedback circuit for temperature regulation of the heater on the flow sensor and, as flow speed changes the thermal energy loss by the heater changes.
12-75V Input to 10V Output DC-DC Buck Converter
This is a versatile synchronous Buck DC/DC converter built using the LM5007 chip.
10μA-10mA Low-Side Current Sensor
This single-supply, low-side, current-sensing solution accurately detects load current between 10μΑ and 10mA.
Precision Switched Integrator Transimpedance Amplifier
This project is based on IVC102 chip from Texas Instruments.
12V Step-Up DC-DC Converter from 1.8V to 5V Input
This is a DC/DC converter that combines a traditional voltage feedback loop and a unique current feedback loop to operate as a constant-current, constant-voltage source.
Signal Conditioner for Piezoelectric Sensors
This is a simple signal conditioner circuit for Piezoelectric sensors.
Capacitive Humidity Sensor to Analog Output Converter
The project presented here is an analog capacitive humidity sensor converter board suitable for various humidity measurement tasks.
Phase-Shifted Full-Bridge Controller with Synchronous Rectification using UCC28950
This Phase-shifted Full-Bridge controller with synchronous rectification carrier board contains all of the features necessary to implement a phase-shifted full-bridge with a synchronous rectification topology power converter.
Linear Capacitive Proximity Sensor
The project presented here is an analog capacitive proximity sensor.