Adafruit Sparkle Motion – ESP32-S3-Based LED Controller with I2S Mic, 4 Outputs, USB-C PD, and WLED/xLights Support
https://www.electronics-lab.com/adafruit-sparkle-motion-esp32-s3-based-led-controller-with-i2s-mic-4-outputs-usb-c-pd-and-wled-xlights-support/
The Adafruit Sparkle Motion with wFL Antenna is an ESP32-based board designed for WLED and xLights smart LED projects. It uses the classic dual-core 240MHz Tensilica ESP32 module with 4MB flash, supporting Wi-Fi, Bluetooth LE, and Bluetooth Classic. The board is optimized for compatibility with WLED and supports various LED configurations from small wearable setups […]
Compact Dual Gigabit Ethernet Router Box, Fully Compatible with All Raspberry Pi Compute Module 5 Variants
https://www.electronics-lab.com/compact-dual-gigabit-ethernet-router-box-fully-compatible-with-all-raspberry-pi-compute-module-5-variants/
The Waveshare CM5-DUAL-ETH-MINI is a compact carrier board built for the Raspberry Pi Compute Module 5 (CM5), designed for networking and embedded applications. It features two independent Gigabit Ethernet ports based on the Realtek RTL8111H controller, making it suitable for use in routers, firewalls, IoT gateways, and edge computing systems. The board includes a USB […]
Waveshare PoE HAT (H) for Raspberry Pi 5 with Onboard PoE Controller IC and Isolated SMPS
https://www.electronics-lab.com/waveshare-poe-hat-h-for-raspberry-pi-5-with-onboard-poe-controller-ic-and-isolated-smps/
The PoE HAT (H) is a compact power over Ethernet solution for the Raspberry Pi 5 and Compute Module 5, which is fully compliant with the IEEE 802.3af/at standards. When connected to a PoE-enabled switch or router, it enables both power and network connectivity through a single Ethernet cable, eliminating the need for a separate […]
Texas Instruments Unveils MSPM0C1104, World’s Smallest Microcontroller for Space-Constrained Applications
https://www.electronics-lab.com/texas-instruments-unveils-mspm0c1104-worlds-smallest-microcontroller-for-space-constrained-applications/
Texas Instruments has released the MSPM0C1104 at Embedded World 2025, calling it as the world’s smallest microcontroller. A member of the MSPM0 Arm Cortex-M0+ MCU family, the unit is only 1.38 mm² in its Wafer Chip-Scale Package (WCSP)—about the size of a black pepper grain. Designed for space-limited applications such as medical wearables and tiny […]
Seeed Studio reComputer J3011B Edge AI PC with NVIDIA Jetson Orin Nano, Cortex-A78AE, and Ampere GPU for AI & IoT Applications
https://www.electronics-lab.com/seeed-studio-recomputer-j3011b-edge-ai-pc-with-nvidia-jetson-orin-nano-cortex-a78ae-and-ampere-gpu-for-ai-iot-applications/
Seeed Studio’s reComputer J3011B Edge AI PC is powered by the NVIDIA Jetson Orin Nano module, featuring a 6-core Arm Cortex-A78AE v8.2 64-bit CPU with up to 67 TOPS AI performance in super mode. It includes up to 8GB of 128-bit LPDDR5 memory and comes with a pre-installed 128GB NVMe SSD for storage. The system […]
iWave Systems STM32MP13x SBC: AI & Industrial Edge Computing
https://www.electronics-lab.com/iwave-systems-stm32mp13x-sbc-ai-industrial-edge-computing/
The STM32MP13x Single Board Computer (SBC) is a compact yet powerful solution for machine learning, vision systems, advanced multimedia, and industrial automation. It is built around the STM32MP13x processor, having a Cortex-A7 core up to 1GHz, so its processing could be efficiently carried out. Integrated with 10/100/1000 Mbps Ethernet PHY and 18-bit RGB display support, […]
Adafruit Metro RP2350: RP2350-Based Arduino-Compatible Board with Dual Cortex-M33, TPS563201 Buck Converter, and HSTX Expansion
https://www.electronics-lab.com/adafruit-metro-rp2350-rp2350-based-arduino-compatible-board-with-dual-cortex-m33-tps563201-buck-converter-and-hstx-expansion/
The Adafruit Metro RP2350 is an Arduino-compatible development board based on the Raspberry Pi RP2350 microcontroller. It features a dual-core ARM Cortex-M33 processor running at 150MHz, 528KB of RAM, and 16MB of QSPI flash for program storage. The board operates at 3.3V logic and includes a 5V buck converter (TPS563201) that accepts a 4.5V to […]
Morse Micro’s MM8108: a next-Gen Wi-Fi HaLow SoC for AI app
https://www.electronics-lab.com/morse-micros-mm8108-next-gen-wifi-halow-soc-for-low-power-iot-connectivity/
Morse Micro is a Sydney-based company that specialises in IoT applications. Micro Morse introduced its Second-generation WiFi HaLow System-on-Chip MM8108. The primary objectives of MM8108 are long-range, low-power, and secure communication. MM8108 is designed to provide enhanced WiFi HaLow connectivity while improving power efficiency with higher data rates. The MM8108 has fully integrated Medium Access […]
Raspberry Pi 5 PCIe Expansion Board: A x1 Slot FFC Connector
https://www.electronics-lab.com/raspberry-pi-5-pcie-expansion-board-a-x1-slot-ffc-connector/
The Spotpear’s Pi5 PCIe Standard Slot Adapter, also termed as Raspberry Pi 5 PCIe Expansion Board, that provides PCIe expansion for the Raspberry Pi 5 SBC, is a standard PCIe adapter that can provide users with flexibility and connectivity options. It is compatible with both PCIe Gen2, Gen3 standards and comes with an external 12V […]
WeAct RP2350B Core Board with USB Type-C, 48 GPIOs, QSPI Flash Support, and Multiple I/O Interfaces
https://www.electronics-lab.com/weact-rp2350b-core-board-with-usb-type-c-48-gpios-qspi-flash-support-and-multiple-i-o-interfaces/
WeAct RP2350B Core USB Type-C Board is a compact development board built around the Raspberry Pi RP2350B microcontroller. It features two 30-pin headers, providing access to all 48 GPIO pins, making it suitable for embedded systems and hardware development. The RP2350B supports Arm and RISC-V architectures, integrating a dual-core Cortex-M33 processor and a dual-core Hazard3 […]