Heltec T096 Combines nRF52840, LoRa, and GNSS for Mesh Networks
https://www.electronics-lab.com/heltec-t096-combines-nrf52840-lora-and-gnss-for-mesh-networks/
Compact LoRa mesh node supports Meshtastic, GNSS tracking, Bluetooth Mesh, and low-power wireless communication with Arduino and MicroPython support.
Meshtastic BASE Board Adds Super IO and Dual-Band Mesh Support
https://www.electronics-lab.com/meshtastic-base-board-adds-super-io-and-dual-band-mesh-support/
Muzi Works pairs the Base Duo with the Super IO board to add display, GPS, IMU, and controls, creating a flexible dual-band Meshtastic mesh platform.
Arduino Stella and Portenta UWB Shield: Real-Time Precision Tracking
https://www.electronics-lab.com/arduino-stella-and-portenta-uwb-shield-real-time-precision-tracking/
Arduino, in partnership with Truesense, is launching its two products: Arduino Stella and Portenta UWB Shield. These devices are designed to provide high-accuracy real-time positional tracking, good connectivity, and secure communication as the Internet of Things (IoT) landscape is incorporating advanced Ultra-Wideband (UWB) technology. The Arduino Stella and Portenta UWB Shield have several key features. […]
Omnimo nRF52840 IoT Development Board with Nordic nRF52840 SoC, Bluetooth 5.4, and Modular Expansion Support
https://www.electronics-lab.com/omnimo-nrf52840-iot-development-board-with-nordic-nrf52840-soc-bluetooth-5-4-and-modular-expansion-support/
The Omnimo nRF52840 is a compact development board designed for IoT prototyping and automation system integration. It is powered by the Nordic nRF52840 SoC, which features a 64 MHz Arm Cortex-M4 MCU with a floating-point unit (FPU), 1 MB Flash, and 256 KB RAM. The board supports Bluetooth 5.4, Bluetooth Mesh, NFC, Thread, Matter, and […]
PAN1770 – Bluetooth 5.1 Low Energy (LE) module
https://www.electronics-lab.com/pan1770-bluetooth-5-1-low-energy-le-module/
The PAN1770 is a Bluetooth 5.1 Low Energy (LE) module based on the Nordic nRF52840 single-chip controller that allows you to attach an external antenna via uFL. The Bluetooth 5.1 features additionally a higher symbol rate of 2 Mbps using the high-speed LE 2M PHY or a significantly longer range using the LE coded PHY […]
Open up new IoT possibilities with Seeed XIAO BLE for TinyML and Seeed Fusion PCBA service
https://www.electronics-lab.com/open-up-new-iot-possibilities-with-seeed-xiao-ble-for-tinyml-and-seeed-fusion-pcba-service/
Seeed Studio has just released the highly anticipated addition to the XIAO series, Seeed XIAO BLE – nRF52840, a powerful Bluetooth LE microcontroller supporting multiple protocols including Bluetooth 5.0, NFC and Zigbee. What’s so special about it? Seeed XIAO BLE and the advanced version, Seeed XIAO BLE Sense are designed for wearable devices and Internet of […]
Bosch Application Board 3.0 accelerates development
https://www.electronics-lab.com/bosch-application-board-3-0-accelerates-development/
Bosch Application Board 3.0 is a versatile and sensor-independent development platform for evaluating various sensors. The Application Board 3.0 shuttle board socket allows a wide range of Bosch Sensortec’s sensors to be plugged in. The application board 3.0 and shuttle board 3.0 evaluate sensors and builds prototypes to test use cases. The Bosch Sensortec Application […]
Würth Elektronik Thetis-I with Evaluation Kit
https://www.electronics-lab.com/wurth-elektronik-thetis-i-with-evaluation-kit/
Radio Module and Test Option for the Wirepas IoT Network Protocol Würth Elektronik launches Thetis-I, a ready-to-use radio module for Wirepas mesh networks. Thetis-I is the perfect solution for IoT device manufacturers. Networks with technology from Wirepas, the Finnish software provider, are self-healing and freely scalable. Each device with a Thetis-I radio module can also […]
Würth Elektronik presents its Bluetooth module Proteus-III-SPI
https://www.electronics-lab.com/wurth-elektronik-presents-its-bluetooth-module-proteus-iii-spi/
Würth Elektronik introduces the Proteus-III-SPI Bluetooth Low Energy 5.1 module. This variant of the tried and tested Proteus-III uses an SPI instead of a UART interface. The new module, based on the Nordic Semiconductor nRF52840 chipset, exploits the possibilities of the Bluetooth Low Energy 5.1 standard—with significantly higher performance. With a payload of up to […]
SparkFun Garmin LIDAR-Lite v4 Distance Measurement Sensor
https://www.electronics-lab.com/sparkfun-garmin-lidar-lite-v4-distance-measurement-sensor/
SparkFun Garmin LIDAR-Lite v4 Qwiic LED Distance Measurement Sensor is a high-performance, wireless optical distance measurement sensor that doesn’t require any soldering to get started. The LIDAR-Lite Sensor features up to a 10-meter range, 1cm resolution, and requires 85mA during data acquisition. Using the I2C protocol, users can read and write to the LIDAR-Lite v4, […]