Rohm Launches LDO Regulator Series With Ultra-Stable Control Technology
https://www.electronics-lab.com/rohm-launches-ldo-regulator-series-with-ultra-stable-control-technology/
The BD9xxN5 LDO regulators feature an output current of 500 mA and a low current consumption of 25 μA, supporting 12 V / 24 V power supplies in automotive, industrial, and consumer applications.
Qualcomm Launches Industrial-Grade Processors for Intelligent Edge Solutions
https://www.electronics-lab.com/qualcomm-launches-industrial-grade-processors-for-intelligent-edge-solutions/
The Dragonwing IQ-X series processors provide “best-in-class” single and multithread performance for industrial PCs, PLCs, HMIs, and edge controllers in demanding industrial conditions.
EDATEC ED-PLC2010 – A Raspberry Pi CM4-based industrial controller with licensed CODESYS runtime
https://www.electronics-lab.com/edatec-ed-plc2010-a-raspberry-pi-cm4-based-industrial-controller-with-licensed-codesys-runtime/
EDATEC has recently introduced the ED-PLC2010 is an industrial controller built around the Raspberry Pi CM4 module, designed for factory automation and process control applications. One of the most interesting features of this controller is that it integrates CODESYS runtime, which enables real-time control, IEC 61131-3 programming, and supports both EtherCAT and Modbus TCP protocols, making […]
GigaDevice GD32H7 Cortex-M7 MCU with Integrates EtherCAT SubDevice Controller for Industrial Automation
https://www.electronics-lab.com/gigadevice-gd32h7-cortex-m7-mcu-with-integrates-ethercat-subdevice-controller-for-industrial-automation/
The GigaDevice GD32H75E Cortex-M7 MCU is a 600 MHz Arm Cortex-M7 microcontroller designed for industrial automation and control. The main feature of this MCU is that it integrates an EtherCAT SubDevice Controller and offers 1024 KB SRAM, 3840 KB flash with security protection, dual Ethernet PHY support, USB Full Speed and High-Speed interfaces, and a […]
LumenRadio W-Modbus Offers Cable-Free Modbus RTU System for Building Automation
https://www.electronics-lab.com/lumenradio-w-modbus-offers-cable-free-modbus-rtu-system-for-building-automation/
LumenRadio has recently launched the W-Modbus solution, which offers a wireless Modbus RTU system, designed to replace traditional Modbus RTU cables. It is based on Nordic’s nRF52840 SoC, connects up to 100 nodes, includes a 100mW power amplifier, and supports Bluetooth LE for smartphone connectivity. By using their MiraMesh wireless mesh topology, W-Modbus ensures low […]
Arduino Unveils Opta Digital, Analog Expansion Modules for Bigger PLC Projects
https://www.electronics-lab.com/arduino-unveils-opta-digital-analog-expansion-modules-for-bigger-plc-projects/
Arduino has announced two new entries in its Opta programmable logic controller (PLC) family, designed for those projects that are a little too complex for a single controller: the Opta Digital and Opta Analog Expansion Modules. These new modules offer additional pins and true analog outputs for the analog variant, enhancing the flexibility of any […]
OpenPLC – Open-source Programming Language Controller Suite Supported by a Wide Range of Hardware
https://www.electronics-lab.com/openplc-open-source-programming-language-controller-suite-supported-by-a-wide-range-of-hardware/
OpenPLC is a fully-featured standardized Programming Logic Controller Suite that officially supports a variety of platforms such as Arduino, Raspberry Pi 2/3/4, Windows, and Linux. This openPLC consists of two main parts named the Runtime software and the programming Editor. While you use the Editor to create, design, compile, and upload your PLC programs, you […]
The Opta is Arduino’s first “Micro PLC” for the Industrial Internet of Things.
https://www.electronics-lab.com/the-opta-is-arduinos-first-micro-plc-for-the-industrial-internet-of-things/
A microcontroller is a single-chip computer that includes memory as well as inputs and outputs. The Arduino microcontroller structures the logic that controls devices and reads sensors in the real world using the Arduino IDE software and the C++ programming language. With pin-style headers and an exposed circuit board, the hardware interface is intended for […]
EdgeLogix-RPI-1000 Comes with High-Performance Features that Provides You with All-in-One Automation Services
https://www.electronics-lab.com/edgelogix-rpi-1000-comes-with-high-performance-features-that-provides-you-with-all-in-one-automation-services/
IoT hardware company, Seeed Studio, recently introduced a new board that targets the Industrial IoT and offers the greatest performance when it comes to the novel automation essentials. The new EdgeLogix-RPI-1000 is a Raspberry Pi-based industrial controller designed with powerful processors and flexible OS, a wide range of IO, multiple wireless capabilities and IT capabilities, […]
TI AM64X family of processors for PLC’s, motor drives, and other industrial automation
https://www.electronics-lab.com/ti-am64x-family-of-processors-for-plcs-motor-drives-and-other-industrial-automation/
In industries, the cloud architecture gathers data from thousands of sensors and uses the data to perform sophisticated analytics to manage operations. Automation is increasing day by day in industries. Automotive pieces of equipment rely on various sensor data for accuracy. Industrial sensors are an essential part of factory automation and Industry 4.0. Motion, environmental, […]