AAEON SRG-CM4: A RISC gateway board with dual Gigabit Ethernet Featuring Raspberry Pi CM4 for Industrial Applications
https://www.electronics-lab.com/aaeon-srg-cm4-a-risc-gateway-board-with-dual-gigabit-ethernet-featuring-raspberry-pi-cm4-for-industrial-applications/
AAEON has recently launched the SRG-CM4, a RISC gateway board featuring a Broadcom BCM2711 quad-core Cortex-A72 SoC running at 1.5 GHz. This compute module 4 (CM4) is specially designed for industrial and IoT applications, offering high-performance and flexible connectivity options. The board supports up to 8 GB of LPDDR4 memory, eMMC 5.1 storage (8 GB […]
Raspberry Pi Releases AI Camera Module With 12MP Sony IMX500 Vision Sensor for Smart Applications and Image Processing
https://www.electronics-lab.com/raspberry-pi-releases-ai-camera-module-with-12mp-sony-imx500-vision-sensor-for-smart-applications-and-image-processing/
Raspberry Pi Ltd has recently launched, the Raspberry Pi AI Camera, a compact camera module, featuring the Sony IMX500 Intelligent Vision Sensor. It has a 12-megapixel sensor with built-in AI, making it easy to create smart vision-based projects without extra hardware. The AI Camera supports multiple sensor modes, including 4056×3040 resolution at 10 fps (frames […]
Waveshare 11.6-inch IPS In-Cell Display has 10-point Touch and 178° Viewing Angle
https://www.electronics-lab.com/waveshare-11-6-inch-ips-in-cell-display-has-10-point-touch-and-178-viewing-angle/
Waveshare has recently launched a new 11.6-inch IPS In-Cell Display with in-cell technology. In-cell is a method where the touch sensors are embedded within the display (LCD) itself, rather than being a separate layer on top. By eliminating a layer, in-cell technology also reduces internal reflections and can improve light transmission, making the screen clearer […]
Adafruit Feather RP2350 Development Board with Raspberry Pi RP2350A MCU and 22-Pin HSTX Display Interface
https://www.electronics-lab.com/adafruit-feather-rp2350-development-board-with-raspberry-pi-rp2350a-mcu-and-22-pin-hstx-display-interface/
Adafruit has launched the Feather RP2350, a development board powered by Raspberry Pi’s RP2350 chip. It features 8MB of flash, a 22-pin HSTX output port, and a Stemma QT connector for easy sensor integration, along with an optional PSRAM slot. Designed for both beginners and experienced developers, it supports MicroPython and CircuitPython. The board is […]
Edgeberry IoT Platform features 3A step-down converter, CAN-bus, USB interfaces, etc
https://www.electronics-lab.com/edgeberry-iot-platform-features-3a-step-down-converter-can-bus-usb-interfaces-etc/
The Tindie has recently launched Edgeberry, an open-source platform developed by SpuQ in Belgium for building IoT Edge solutions using a Raspberry Pi. This IoT includes a base board, hardware cartridges, and software to enhance Raspberry Pi’s IoT capabilities. The Edgeberry Base Board connects to the Raspberry Pi’s GPIO header and provides features like a […]
IRIV RP2350 IO Controller is Designed for Industrial Applications and features DIN Rail Mount
https://www.electronics-lab.com/iriv-rp2350-io-controller-is-designed-for-industrial-applications-and-features-din-rail-mount/
Cytron has recently released the IRIV RP2350 IO Controller, an industry 4.0 controller built around the Raspberry Pi RP2350 microcontroller. The USP of the product is that it comes with a variety of isolated interfaces such as DI and DO up to 50V, an ethernet port powered by the W5500, and features a DIN rail mount […]
Edgeberry: Transforming Raspberry Pi to edge IoT
https://www.electronics-lab.com/edgeberry-boosting-raspberry-pi-iot-with-modular-boards/
Recently there has been a buzz about EdgeBerry, an innovative, open-source platform created by Belgium-based maker Sanne Santens. Edgeberry simplifies the development and deployment of IoT devices, by blending hardware, software, and mechanical integration possibilities. It can assist in the transformation of a Raspberry Pi into powerful IoT edge solutions, making it an ideal tool […]
Raspberry PI RP2350 Compact Boards also comes with a Carrier board
https://www.electronics-lab.com/raspberry-pi-rp2350-compact-boards-also-comes-with-a-carrier-board/
Sweden-based consumer electronics company Solder Party has just released two new RP2350 Compact Boards named the RP2350 Stamp, and RP2350 Stamp XL. The company has also released a carrier board that can be configured with either the RP2350 Stamp or the RP2350 Stamp XL. As the RP2350 Stamp has a more compact form factor the GPIO […]
SparkFun Pro Micro-RP2350: Dual-Core Cortex-M33 and RISC-V Microcontroller Development Board
https://www.electronics-lab.com/sparkfun-pro-micro-rp2350-dual-core-cortex-m33-and-risc-v-microcontroller-development-board/
The RP2350 is a dual-core microcontroller featuring two ARM Cortex M33 and two Hazard3 RISC-V processors, with a selectable boot option for any two cores. It operates at 150 MHz, has 520 kB SRAM in 10 banks, and includes peripherals like two UARTs, two SPI controllers, two I2C controllers, and a USB 1.1 controller for […]
RP2040-Touch-LCD-1.69: Featuring RP2040, QMI8658 6-Axis Sensor, and ETA6096 Li-Ion Recharge Circuit
https://www.electronics-lab.com/rp2040-touch-lcd-1-69-featuring-rp2040-qmi8658-6-axis-sensor-and-eta6096-li-ion-recharge-circuit/
Waveshare’s RP2040-Touch-LCD-1.69 is a compact MCU board built around Raspberry Pi’s RP2040 microcontroller. It features a dual-core Arm Cortex M0+ processor running up to 133 MHz, with 264KB of SRAM and 16MB of Flash memory. The board includes a 1.69-inch capacitive touch display, a QMI8658 6-axis sensor (combining a 3-axis accelerometer and 3-axis gyroscope), an […]