Mini Infra-Red Remote Robot Controller Shield For Arduino Nano
https://www.electronics-lab.com/mini-infra-red-remote-robot-controller-shield-arduino-nano/
The Mini Infra-Red Remote Robot Controller shield for Arduino Nano is designed to drive mini mobile robots. Low voltage DC Motor controller interface allows Infrared wireless control of two DC motors, two PWM and 2 Direction signal outputs to drive two motors separately. TB6612 IC is the heart of the project. IC can handle constant […]
RGB Led Driver Shield for Arduino Nano
https://www.electronics-lab.com/rgb-led-driver-shield-arduino-nano/
This is my second project for LED Driver based on CAT4101 IC. The first project was for single White LED. This project has been designed to drive 3 channels of RGB LEDs with PWM signal which helps to create multi-color LED light. Arduino Nano is used to generate PWM signals for RGB LEDs and board […]
SensiBLEduino – A full fledge ‘hardware-ready’ development kit for IoT and supports Arduino
https://www.electronics-lab.com/sensibleduino-full-fledge-hardware-ready-development-kit-iot-supports-arduino/
IoT which translates to the Internet of Things has been a significant buzz for the last five years while disrupting major Industries (from Agriculture, Energy, Healthy, Sports and several others). IoT adoption has seen rapid development in the makers’ world, with different makers and manufacturers producing various forms of boards, chips, software to facilitate quick […]
DAC Shield For Arduino Nano using MCP4725
https://www.electronics-lab.com/dac-shield-arduino-nano-using-mcp4725/
This project features an easy to use Digital to Analog converter (DAC) shield for Arduino Nano. The project is built using MC4725 12Bit DAC IC over I2C communication. The shield directly seats on Arduino Nano and also can be used as stand-alone DAC converter that can be connected to other micro-controller board with help of […]
The Little Buddy Talker – Arduino Compatible Speech Chip Set
https://www.electronics-lab.com/little-buddy-talker-arduino-compatible-speech-chip-set/
Small, versatile, fun, and inexpensive! Use the 254 word library to bring speech to your Arduino projects! Speak, Arduino, Speak! About a year ago, I designed an Arduino shield that allowed for you to add voice to your electronic designs. I’ve since been able to minimise that design into a much less inexpensive, and smaller […]
Arduino Nano to PIC40/28 Pin Shield
https://www.electronics-lab.com/arduino-nano-pic40-28-pin-shield/
Arduino Nano to PIC40/28 PIN development shield is an extension for Arduino Nano. This project is useful to create many projects using PIC40/28PIN shield published on electronics-lab.com, refer to schematic and connection diagram to use this shield. Two on board regulators are provided which outputs 5V DC and 3.3V DC, this dual supply helps many […]
2 Channel Relay Shield for Arduino Nano
https://www.electronics-lab.com/2-channel-relay-shield-arduino-nano/
2 Channel Mini easy to use Relay shield for Arduino Nano consists of ULN2003 IC and 2 Mini 12V Relays with NO/NC contacts of 2A-24V Load Capacity. ULN2003 used as Relay coil driver. Relay can be controlled from D3 and D4 of Arduino Nano. Three pin Header Connector CN1 and CN2 provided to connect the […]
1Amp Constant Current LED Driver Shield for Arduino Nano
https://www.electronics-lab.com/1amp-constant-current-led-driver-shield-arduino-nano/
1A Constant current LED driver shield for Arduino Nano has been designed for verity of LED related applications. The shield provides accurate LED current sink to regulate LED current in a string of LEDs or single LED. The LED current is mirrored from the current flowing from the RSET Preset PR1. On board 1W LED […]
16X2 LCD Shield with LMD18201 Motor Driver
https://www.electronics-lab.com/16x2-lcd-shield-lmd18201-motor-driver/
LCD is very important part of many DIY and industrial projects. The 16X2 LCD shield has been designed to develop LCD related projects using 28-40 Pin Pic development board or DSpic development board, along with LCD this shield includes LMD18201 DC Motor driver , 2 Trimmer potentiometer and 4 tact switches with jumpers. Jumpers […]
MP3 Module & RTC DS1307 Shield For 28/40 Pin PIC Development Board
https://www.electronics-lab.com/mp3-module-rtc-ds1307-shield-2840-pin-pic-development-board/
MP3 Shield has been designed for various applications related to voice record and play using MP3 module with memory card storage, this shield can be used as standalone mode or Digital mode by serial interface. In standalone mode it can play 16 messages with couple of other functions, Standalone operation possible by connecting resistors and […]