Power-Saving PWM Solenoid Controller
https://www.electronics-lab.com/power-saving-pwm-solenoid-controller/
The project described here is a power-saving pulse-width modulator (PWM) controller for solenoids with an internal supply regulator. The board is based on the DRV110 IC which is a PWM current controller which is specifically designed for solenoid and relay applications. The project regulates the current with a well-controlled waveform to reduce power dissipation on […]
Vishay / Dale IHPT-1411AF-AB0 Haptic Feedback Actuator
https://www.electronics-lab.com/vishay-dale-ihpt-1411af-ab0-haptic-feedback-actuator/
Vishay / Dale IHPT-1411AF-AB0 Haptic Feedback Actuator features solenoid construction that provides high impulse vibration for clear tactile feedback in noisy environments. The Vishay / Dale IHPT-1411AF-AB0 Haptic Feedback Actuator can drive a 0.5kg load to 6g of acceleration with a 12V, 5ms pulse. The actuator features compact, two-piece construction for easy implementation into industrial […]
8 Channel Inductive Load Driver Arduino Shield
https://www.electronics-lab.com/8-channel-inductive-load-driver-arduino-shield/
The 8 Channel Driver Arduino UNO Shield is designed to enable users to switch inductive loads for up to 800mA each channel and up to 24V DC with no heat-sink needed. It is ideal for such applications as driving 2x unipolar stepper motors, solenoids, relays, and small DC motors. It uses 2x DRV8803 Chip from […]
2.7A PWM Valve/Solenoid Driver Arduino Nano Shield
https://www.electronics-lab.com/2-7a-pwm-valve-solenoid-driver-arduino-nano-shield/
This Arduino shield helps to drive various loads like a solenoid, valve, motor, inductive actuator, heater, and bulb. A wide supply range 8V-60V and a load current of 2.7A allows it to be used with a variety of actuators. The board can be used as a stand-alone driver or it can be controlled by Arduino […]
Isolated Gate MOSFET Driver Based DC Motor and Solenoid Driver Arduino Nano Shiled
https://www.electronics-lab.com/isolated-gate-mosfet-driver-based-dc-motor-solenoid-driver-arduino-nano-shiled/
This is an Isolated gate driver-based N channel Mosfet Arduino Nano shield based on Si8261ACC, which can be used in various applications like DC Motor driver, solenoid driver, led driver, bulb driver and heater driver, with 3A fast switching diode provided across the output for an inductive load which protects the circuit from back EMF. […]
+9V TO 60V PWM 2.3A SOLENOID VALVE DRIVER USING DRV101
https://www.electronics-lab.com/9v-60v-pwm-2-3a-solenoid-valve-driver-using-drv101/
The DRV101 is a low-side power switch employing a pulse-width modulated (PWM) output. Its rugged design is optimized for driving electromechanical devices such as valves, solenoids, relays, actuators, and positioners. The DRV101 module is also ideal for driving thermal devices such as heaters and lamps. PWM operation conserves power and reduces heat rise, resulting in […]
PWM Solenoid and Valve Driver using DRV103
https://www.electronics-lab.com/pwm-solenoid-valve-driver-using-drv103/
Tiny module is a PWM Solenoid and Valve driver using Texas instrument’s DRV103 low-side DMOS power switch employing a pulse-width modulated (PWM) output. Its rugged design is optimized for driving electromechanical devices such as valves, solenoids, relays, actuators, motors and positioners. This board is also ideal for driving thermal devices such as heaters, coolers, lamps, […]