Murata Power Solutions MYR Series Ultra-small .5A to 2A DC/DC Converters
Parts

Murata Power Solutions MYR Series Ultra-small .5A to 2A DC/DC Converters

Murata's MYR series are the PicoBK™ DC/DC converters that integrate a coil and a control IC. The ultra-small form-factor measures 2.5 mm x 2.0 mm x 1.0 mm. The MYR series is significantly smaller than discrete solutions. In most cases, these modules occupy less than half the...

Continue Reading
2.404
Views
0 Comments
STMicroelectronics L7983 step-down switching regulator
IC

STMicroelectronics L7983 step-down switching regulator

The L7983 device is a step-down monolithic switching regulator able to deliver up to 300 mA DC based on peak current mode architecture The L7983 device is a step-down monolithic switching regulator able to deliver up to 300 mA DC based on peak current mode architecture. The output...

Continue Reading
1.688
Views
0 Comments
TI Release TPS62912, TPS62913 family of low-noise DC/DC Switching Regulators
IC

TI Release TPS62912, TPS62913 family of low-noise DC/DC Switching Regulators

Texas Instruments released the TPS62912 and TPS62913 family of low-noise DC/DC switching regulators with integrated ferrite-bead compensation. They offer low noise of 20 µVRMS for frequencies ranging from 100 Hz to 100 kHz and ultra-low output-voltage ripple of 10 µVRMS. Traditional...

Continue Reading
2.385
Views
0 Comments
MP8774H Synchronous Step-Down Converter
IC

MP8774H Synchronous Step-Down Converter

MPS' MP8774H has constant on-time (COT) control operation and provides very fast transient response, easy loop design, and very tight output regulation MPS' MP8774H is a fully integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter with internal...

Continue Reading
2.115
Views
0 Comments
MPM54304 DC/DC Stepdown Power Module
IC

MPM54304 DC/DC Stepdown Power Module

MPS' quad-output, DC/DC stepdown power module features up to 2 A and 3 A per output Monolithic Power Systems’ MPM54304 is a complete power management module that integrates four high-efficiency step-down DC/DC converters, inductors, and a flexible logic interface. This COT control...

Continue Reading
2.273
Views
0 Comments
Flex Power Modules extends 2W DC/DC converter solutions for industrial use
Power

Flex Power Modules extends 2W DC/DC converter solutions for industrial use

Flex Power Modules has added to its range of miniature isolated DC/DC converters intended for industrial applications with the introduction of the PUB-2M series. Delivering an output power of up to 2W with no minimum load required, the high performance product is available in single or...

Continue Reading
2.178
Views
0 Comments
USB (5V) to Dual Output +/-15V or +/-12V Step-Up DC-DC Converter
Power supply

USB (5V) to Dual Output +/-15V or +/-12V Step-Up DC-DC Converter

This USB to dual output step-up DC-DC converter has been designed to be used in industrial automation control equipment, sensors, isolated operational amplifiers and test & measurement equipment that require bipolar supply voltages. The module provides +/-15V or +/-12V DC load...

Continue Reading
3.814
Views
0 Comments
UCC12040/50 3 kVRMS and 5 kVRMS Isolated DC/DC Converters
Power supply

UCC12040/50 3 kVRMS and 5 kVRMS Isolated DC/DC Converters

Texas Instruments' 500 mW, high-efficiency low-EMI converters are suitable for ultra-high voltage applications. Texas Instruments' UCC12040 and UCC12050 DC/DC converters with 3 kVRMS and 5 kVRMS reinforced isolation ratings, respectively, are designed to provide efficient,...

Continue Reading
2.712
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives