OSD335x-SM & OSD3358-SM-RED Dev Board
https://www.electronics-lab.com/osd335x-sm-osd3358-sm-red-dev-board/
Austin, Texas (September 19, 2017) – Octavo Systems LLC (Octavo) announced the production release and immediate availability of its highly anticipated OSD335x-SM System-In-Package (SiP) device. The OSD335x-SM, like the entire OSD335x family, integrates the Texas Instruments (TI) Sitara™ AM335x processor with an ARM® Cortex®-A8 core running at 1GHz, DDR3 memory, a TPS65217C power management IC (PMIC), […]
Terahertz Electronics – Way To Bridge The largely-untapped Region Between 100GHz and 10THz
https://www.electronics-lab.com/terahertz-electronics-way-bridge-largely-untapped-region-100ghz-10thz/
The terahertz (THz) region, which is based on 1THz frequency, separates electronics from photonics and has been difficult to access for ages. Semiconductor electronics cannot handle frequencies equal to or greater than 100GHz due to various transport-time related limitations. In other hand, photonics devices fail to work below 10THz as photon’s energy significantly drops to thermal energy. Terahertz […]
Digi-Key Releases New Addition of Symbols & Footprints for Vishay Products
https://www.electronics-lab.com/digi-key-releases-new-addition-symbols-footprints-vishay-products/
New models, available via SnapEDA, streamline the design-in of Vishay optoelectronics parts. THIEF RIVER FALLS, Minnesota, SANTA CLARA, California, and SAN FRANCISCO, California, USA – Digi-Key Electronics, a global electronic components distributor, today announced the addition of symbols, footprints, and 3D models for Vishay’s catalog of optoelectronics products. The models, made available via online parts […]
LimeSDR Mini – Software-defined-radio card
https://www.electronics-lab.com/limesdr-mini-software-defined-radio-card/
An open, full-duplex, USB stick radio for femtocells and more. The LimeSDR and LimeSDR Mini are members of the same family of software-defined radios. One does not replace the other. Rather, they are complementary. Simply put, the LimeSDR Mini is a smaller, less expensive version of the original LimeSDR. However, it still packs a punch […]
Fennec: LoRa Development Board
https://www.electronics-lab.com/fennec-lora-development-board/
An ultra low power LoRa sensor node powered by just one CR2032 batter. By Harm Wouter Snippe: Do you want to measure temperature, connect a soil humidity sensor in your vegetable garden or monitor the air quality at your street corner? With the Fennec Development Board you are able to connect almost any sensor and […]
Teardown, Repair & Upgrade of an Agilent E4405B 13.5GHz ESA-E Spectrum Analyzer
https://www.electronics-lab.com/teardown-repair-upgrade-agilent-e4405b-13-5ghz-esa-e-spectrum-analyzer/
Teardown, Repair & Upgrade of an Agilent E4405B 13.5GHz ESA-E Spectrum Analyzer – [Link]
New Ultrathin Semiconductors Can Make More Efficient and Ten Times Smaller Transistors Than Silicon
https://www.electronics-lab.com/new-ultrathin-semiconductors-can-make-efficient-ten-times-smaller-transistors-silicon/
The researchers at Stanford University have discovered two ultrathin semiconductors – hafnium diselenide and zirconium diselenide. They share or even exceed some of the very important characteristics of silicon. Silicon has a great property of forming “rust” or silicon dioxide (SiO2) by reacting with oxygen. As the SiO2 acts as an insulator, chip manufacturers implement this property […]
Researchers Developed VO2 Based MEMS Mirror Actuator That Requires Very Low Power
https://www.electronics-lab.com/researchers-developed-vo2-based-mems-mirror-actuator-requires-low-power/
A joint research by the US Air Force Research Laboratory Sensors Directorate and Michigan State University have developed micro-electromechanical systems (MEMS) actuator based on smart materials, specifically vanadium dioxide (VO2). In the room temperature, Vanadium dioxide exhibits the Mott transition. It is a not-well-understood phenomenon known to occur in transition metal chalcogenides and transition metal oxides. The research team […]
SPI Isolation Board
https://www.electronics-lab.com/spi-isolation-board/
The isolated SPI module is designed for applications, where SPI signals need to be transferred over longer distances than usually. It is based on Linear’s LTC6820. The board is designed as two layer stack-up, with GND plane on the bottom layer and signal traces and components at the top layer. Signals and power are supplied […]
20 Input AND Gate
https://www.electronics-lab.com/20-input-gate/
SyncChannelBlog @ oshpark.com writes: What to do when you have a partial reel of 74AHCT08 chips burning a hole in your pocket? Design a 20 Input AND gate of course. 20 Input AND Gate – [Link]