AAEON Brings Intel Atom x7000E Series to the 4″ EPIC Board Range With EPIC-ADN9 Release
https://www.electronics-lab.com/aaeon-brings-intel-atom-x7000e-series-to-the-4-epic-board-range-with-epic-adn9-release/
Supporting quadruple 2.5GbE LAN, three simultaneous displays, and efficient Intel® processors, the EPIC-ADN9 brings offers greater flexibility than ever before. AAEON, a global leader in embedded computing, has introduced the EPIC-ADN9, featuring the newest iteration of Intel® technology on its 4.53″ x 6.50″ (115mm x 165mm) EPIC series of single-board computers. Offering a range of […]
The BOXER-8621AI Demonstrates Design Excellence, Bringing NVIDIA Jetson Orin Nano Performance to Key Vertical Markets
https://www.electronics-lab.com/the-boxer-8621ai-demonstrates-design-excellence-bringing-nvidia-jetson-orin-nano-performance-to-key-vertical-markets/
AAEON’s first AI system powered by the NVIDIA® Jetson Orin Nano™ combines the very best elements of edge computing with the type of versatility that’s only possible with expert engineering. AAEON, a global leader in edge AI computing, has unveiled the BOXER-8621AI, its inaugural fanless embedded AI System powered by the NVIDIA® Jetson Orin Nano™ […]
350W Power Factor Boost Converter for Inverter-Fed BLDC and PMSM Motors
https://www.electronics-lab.com/project/350w-power-factor-boost-converter-for-inverter-fed-bldc-and-pmsm-motors/
This 350W power factor boost converter is designed for inverter-fed BLDC/PMSM motor appliances, A/C units, Refrigerators, and industrial power supplies. The circuit is a continuous-conduction-mode boost converter implemented using a UCC28180 PFC controller module which provides all the necessary built-in protections. It’s a robust output supply protected for output cover current, output over-voltage, and output […]
Two Channel High Side Driver with Analog Sense for Automotive Applications
https://www.electronics-lab.com/project/two-channel-high-side-driver-with-analog-sense-for-automotive-applications/
The project presented here is suitable for all types of resistive, inductive, and capacitive loads, and can also be used to drive LEDs. The board is built using 2 x VN5025AJ chips which are monolithic devices made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to […]
Breakout Board for UCC28019 and UCC28128 PFC Controller
https://www.electronics-lab.com/project/breakout-board-for-ucc28019-and-ucc28128-pfc-controller/
This is a breakout board for UCC28019 and UCC28128 PFC controllers. This module enables users to build a high-power PFC (Power Factor Correction) controller. Active PFC uses the boost topology operating in Continuous Conduction Mode (CCM). The controller is suitable for systems in the 100 W to >2 kW range over a wide-range universal ac […]
High Power Bipolar Stepper Motor Driver with SPI Interface
https://www.electronics-lab.com/project/high-power-bipolar-stepper-motor-driver-with-spi-interface/
This is a compact high-power stepper motor driver built for bipolar stepper motors. The driver can be controlled using a serial communication interface (SPI). It combines a flexible ramp generator for automatic target positioning with the industry’s most advanced stepper motor driver. Using external transistors, the driver ensures absolutely noiseless operation combined with maximum efficiency […]
DC Motor Position Control Using Potentiometer – Arduino Compatible
https://www.electronics-lab.com/project/dc-motor-position-control-using-potentiometer-arduino-compatible/
The project presented here is an Arduino-compatible motor control board. The board consists of an ATMEGA328 microcontroller, LMD18201 H-Bridge, and 2 x potentiometers. This closed-loop servo system provides position control using a feedback potentiometer mounted on the output shaft of the gearbox and provides position control by turning the shaft of the reference potentiometer, the […]
Self-Oscillating Full-Bridge Using IRS2453
https://www.electronics-lab.com/project/self-oscillating-full-bridge-using-irs2453/
This is a Self-oscillating full-bridge project built using the IRS2453 chip. This chip incorporates a high-voltage full-bridge gate driver with a front-end oscillator similar to the industry standard CMOS 555 timer. HVIC and latch-immune CMOS technologies enable ruggedized monolithic construction. The output driver features a high pulse current buffer stage designed for minimum driver cross-conduction. […]
Function Generator Using AD9833 DDS – Arduino Compatible
https://www.electronics-lab.com/project/function-generator-using-ad9833-dds-arduino-compatible/
This is an Arduino-compatible hardware designed for building a low-cost function generator. The project consists of all the required spices to build your own function generator. It includes multiple options such as a potentiometer, rotary encoder, tactile switches, op-amp, and 16×2 LCD interface. The project can output sine, triangular, and square waves with gain adjustment […]
DC Electronic Load – 1A
https://www.electronics-lab.com/project/dc-electronic-load-1a/
This is a very precise Electronic Load project built using the ultra-Precision, Low-Noise OPAMP MAX44251 from Analog Devices. The project can sink current from a power source. It can be used as test gear for power supplies, chargers, solar panels, batteries, and DC-DC converters. The resistor R11 acts as a shunt, OPAMPs convert current into […]