STMicroelectronics STLINK-V3PWR in-circuit debugger and programmer
https://www.electronics-lab.com/stmicroelectronics-stlink-v3pwr-in-circuit-debugger-and-programmer/
STLINK-V3PWR – Compact in-circuit debugger and programmer for STM32 STLINK-V3PWR is a two-in-one standalone debugger probe and a source measurement unit (SMU) designed to synchronize code execution with a power consumption of STM32 applications in real time. This tool is specifically adapted for power consumption optimization (patent pending). STLINK-V3PWR can be used as a standalone […]
Nordic Semiconductor Announces nRF54H20, a 4th generation multiprotocol SoC
https://www.electronics-lab.com/nordic-semiconductor-announces-nrf54h20-a-4th-generation-multiprotocol-soc/
Nordic Semiconductor, a leader in low-power, high-performance wireless connectivity for the IoT, today introduces the first of its fourth generation of multiprotocol Systems-on-Chip (SoCs): the nRF54H20. This innovative new hardware architecture, fabricated on the GlobalFoundries 22FDX® leading process node, extends Nordic’s pioneering approach in Bluetooth® Low Energy (Bluetooth LE) and follows the company’s award-winning nRF51, […]
LILYGO’s Upgraded T-Display-S3 AMOLED for $25.68 USD
https://www.electronics-lab.com/lilygos-upgraded-t-display-s3-amoled-for-25-68-usd/
The T-Display-S3 AMOLED is a development board and is an updated version of the T-Display-S3 and has the first combination of an ESP32-S3 with an AMOLED display. The previous LCD display has been replaced with an AMOLED one, which results in an improved color display. In addition, it now features a QSPI interface instead of […]
Powerful ESP32-S3 Terminal SPI 3.5″Inch TFT Touch Display for $39.90
https://www.electronics-lab.com/powerful-esp32-s3-terminal-spi-3-5inch-tft-touch-display-for-39-90/
With a strong ESP32-S3 chip, 2.4GHz Wi-Fi compatibility, and Bluetooth 5 (LE), this handheld terminal is built on the powerful ESP32 controller which offers enhanced computing and processing capabilities for IoT terminal applications. The ESP32-S3-N16RB module can lead to a variety of interfaces due to its scalability. It incorporates a MEMS microphone, camera interface, and […]
Features of the Seeed Studio XIAO ESP32S3 Development Board
https://www.electronics-lab.com/features-of-the-seeed-studio-xiao-esp32s3-development-board/
The Seeed Studio XIAO Series are tiny development boards with a thumb-sized size and a comparable hardware architecture. The Seeed Studio XIAO ESP32S3 uses a 240MHz Xtensa 32-bit LX7 dual-core processor, allowing WiFi and Bluetooth 5.0 wireless connectivities, deep sleep mode with power consumption as low as 14 μA, and lithium battery charging management. It […]
DongshanPI-PicoW, A Tiny Arm Linux Board- A Review
https://www.electronics-lab.com/dongshanpi-picow-a-tiny-arm-linux-board-a-review/
The DongshanPI-PicoW is a tiny Arm Linux board that features four 12-pin headers in addition to the SSW101B USB WiFi chip. According to its name, the DongshanPI-PicoW board or module is intended to be an Arm Linux alternative to the Raspberry Pi Pico W. It features a SigmaStar SSD210 dual-core Cortex-A7 processor with 64MB RAM, […]
Oak Dev Tech’s Low-Power IcyBlue FPGA Feather Development Board
https://www.electronics-lab.com/oak-dev-techs-low-power-icyblue-fpga-feather-development-board/
With the help of this exclusive IcyBlue FPGA feather developed by OAK DEV TECH, it is simple to launch an FPGA development project using powerful and dependable ICE5LP4K FPGA from Lattice Semiconductor. The ICE5LP4K includes two hardware I2C and SPI blocks, a bright RGB LED, two user LEDS, and 22 user-accessible GPIO that can be […]
Magnet Based Rotary/Linear Encoder Module with Quadrature Output
https://www.electronics-lab.com/project/magnet-based-rotary-linear-encoder-module-with-quadrature-output/
This sensor module is a simple solution to build a magnet-based rotary encoder. The project is based on the AS5304 chip with integrated Hall elements for measuring linear or rotary motion using multi-pole magnetic strips or rings. This allows the usage of the module in applications where the Sensor IC cannot be mounted at the […]
Stepper Motor Based Rotary Encoder with Clock and Up/Down Direction Signal Output
https://www.electronics-lab.com/project/stepper-motor-based-rotary-encoder-with-clock-and-up-down-direction-signal-output/
This project enables the users to use a stepper motor as a rotary encoder for position control and Up/Down direction control. A bipolar stepper motor can be used as a rotary sensor as it generates two channel strings of pulses by turning the shaft. The circuit provides Step pulse and Up/Down Direction signals by rotating […]
Low-Cost Boost Converter 3.3V Input – 5V Output at 250mA
https://www.electronics-lab.com/project/low-cost-boost-converter-3-3v-input-5v-output-at-250ma/
This is a low-cost boost converter that converts a 3.3V input to 5V at 250mA load current. The LM2578A chip is used to build this project. The LM2578A is a switching regulator which can easily be set up for such DC-to-DC voltage conversion circuits as the buck, boost and inverting configurations. In this board, the […]