Phi Mainboard 5LC: ESP-32 Based Open Source 3D Printer Controller
https://www.electronics-lab.com/phi-mainboard-5lc-esp-32-based-open-source-3d-printer-controller/
Around a decade ago, 3D printers were bulky, expensive machines only used by industries and not available for a large group of people except professionals. 3D printing technology has come a long way since then. But with the open-source movement, 3D printers are now affordable for makers, designers, engineers, hobbyists, and even students. With 3D […]
NXP IW612 Tri-Radio Device Supporting Wi-Fi 6, Bluetooth 5.2 and ZigBee
https://www.electronics-lab.com/nxp-iw612-tri-radio-device-supporting-wi-fi-6-bluetooth-5-2-and-zigbee/
CES has always been interesting for tech enthusiasts looking for some next-generation high technologically advanced products. In regards to IoT and wireless communication, NXP showcased IW612 as the industry’s first secure tri-radio device which can now support Wi-Fi 6, Bluetooth 5.2, and 802.15.4 technical standards. NXP had a similar single-chip device by the name of […]
Low-Cost DC Motor Direction Controller with Fast Brake using 2 Relays
https://www.electronics-lab.com/project/low-cost-dc-motor-direction-controller-with-fast-brake-using-2-relays/
The project presented here is a low-cost easy to use DC brushed motor direction controller with fast-brake, the project was built using two 12V Relays, 2 x BJT transistors, and 2 x tactile switches. The two LEDs are provided to display the motor direction, 2 tactile switch controls the direction of the motor. Operation Connect […]
Shenzhen Xunlong’s Orange Pi 3 LTS Single-Board Computer For $35
https://www.electronics-lab.com/shenzhen-xunlongs-orange-pi-3-lts-single-board-computer-for-35/
Chinese manufacturer, Shenzhen Xunlong has launched yet another open-source single-board computer featuring the Allwinner H6 system-on-chip: Orange Pi 3 LTS. We have witnessed the new Orange Pi hitting the market every time around this time of the year, just like the Orange Pi R1 Plus last year. Orange Pi 3 LTS comes with the […]
Open Source CaribouLite SDR Raspberry Pi HAT for $119
https://www.electronics-lab.com/open-source-cariboulite-sdr-raspberry-pi-hat-for-119/
Raspberry Pi ecosystem has witnessed an open-source software-defined radio HAT after a very long time. All-long CaribouLite is looking to crowdfunding for mass production and to get a response from the hacker community. After a series of changes since the first draft version seen on CrowdSupply, [David] finally announced the launch of the new product […]
TinyOLEDdemo – I²C OLED on an ATtiny10, ATtiny13A or ATtiny202
https://www.electronics-lab.com/tinyoleddemo-i%c2%b2c-oled-on-an-attiny10-attiny13a-or-attiny202/
This is just a little demo on how to use an I²C OLED with the limited capabilities of an ATtiny10, ATtiny13A or ATtiny202 from Stefan Wagner @ github.com Connect the OLED module to the ATtiny13A as shown below. The connections for the ATtiny10 are similar. For the ATtiny202 SDA must be connected to PA1 (pin […]
e-con Systems™ launches 18 MP MIPI camera module for the NVIDIA Jetson Xavier™ NX platform
https://www.electronics-lab.com/e-con-systems-launches-18-mp-mipi-camera-module-for-the-nvidia-jetson-xavier-nx-platform/
1/2.3-inch AR1820 sensor | 18 MP MIPI CSI 2 | 4 levels of zoom | NVIDIA Jetson Xavier™ NX e-con Systems™ launches e-CAM180_CUMI1820_MOD, an 18 MP MIPI camera solution for the NVIDIA Jetson Xavier™ NX platform. e-CAM180_CUMI1820_MOD is based on the 1/2.3-inch AR1820 sensor from ON Semiconductor. This camera module provides image output at a […]
Biomedical ‘lab-on-chip’ for wearable health
https://www.electronics-lab.com/biomedical-lab-on-chip-for-wearable-health/
Wearable biomedical product developer Onera Health has introduced an ultra-low-power biosignal sensor hub for wearable health. The Onera Biomedical-Lab-on-Chip sensor system-on-chip acquires and processes multiple biosignals and is designed for a broad range of wearable health applications and devices. The devices, says the company, offer many solutions and opportunities for innovation in the medical, wellness […]
BLDC Motor and DC Brushed Motor Driver
https://www.electronics-lab.com/bldc-motor-and-dc-brushed-motor-driver/
This BLDC motor driver board is equipped with a smart IFX007T half-bridge. The BLDC motor control project is capable to drive one BLDC motor. Alternatively, it can be used to drive one or two bi-directional DC motors (H-Bridge configuration, cascaded to support the second motor) or up to three uni-directional DC motors (half-bridge configuration). The […]
Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible
https://www.electronics-lab.com/brushed-dc-motor-controller-using-rotary-encoder-arduino-compatible/
This DC Motor controller provides direction and speed control of brushed DC Motor using Rotary Encoder. This is Arduino compatible hardware that consists of LMD18201 DC motor driver chip, Atmega328 microcontroller, Rotary Encoder, L317 regulator, and other components. Hardware offers easy control of brushed DC motor up to 3A with speed, direction, and brake control. […]