TDK InvenSense ICP-10125 Pressure & Temperature Sensor IC is waterproof
https://www.electronics-lab.com/tdk-invensense-icp-10125-pressure-temperature-sensor-ic-is-waterproof/
TDK InvenSense ICP-10125 Pressure and Temperature Sensor IC is based on MEMS capacitive technology which provides ultra-low noise at the lowest power. This enables the sensor IC to provide industry-leading relative accuracy, sensor throughput, and temperature stability. This sensor IC can measure pressure differences with an accuracy of ±1Pa. This accuracy enables altitude measurement differentials as […]
Cassiopeia CB410L CBRS Module
https://www.electronics-lab.com/cassiopeia-cb410l-cbrs-module/
Sequans’ CB410L all-in-one standalone module is suitable for a wide range of medium-rate data applications Sequans’ Cassiopeia CB410L cost-effective leadless chip carrier (LCC) module is purpose-built to enable easy and massive deployment of IoT devices on private LTE CBRS networks. Based on the Cassiopeia broadband IoT chip, CB410L is suitable for a wide range of […]
MCP4461 8-Bit Quad digital potentiometers with NVM and I2C
https://www.electronics-lab.com/mcp4461-8-bit-quad-digital-potentiometers-with-nvm-and-i2c/
Microchip’s MCP4461 non-volatile 8-bit digital potentiometers with EEPROM and an I2C compatible interface The MCP4461 devices from Microchip Technology; are non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an I2C compatible interface. The MCP446X family is available with end-to-end resistor values of 5 KΩ, 10 KΩ, 50 kΩ, and 100 KΩ. These devices […]
paperd.ink: Simple and Elegant E-paper development board
https://www.electronics-lab.com/paperd-ink-simple-and-elegant-e-paper-development-board/
E-paper or e-ink displays mimic the appearance of ink on paper, making it suitable for reading. These displays provide a wider viewing angle, and the e-paper display is easily visible in direct sunlight without the image appearing to fade. Most e-paper displays today are based on ESP32 WiFi with touchscreens and additional Bluetooth connectivity. Earlier, […]
Researchers from the University of Chicago developed a foldable haptic actuator for mixed reality applications
https://www.electronics-lab.com/researchers-from-the-university-of-chicago-developed-a-foldable-haptic-actuator-for-mixed-reality-applications/
Actuators are the moving part of a device that controls the mechanism of a system. A simple example of an actuator is the opening of a valve. With this simple example of a solenoidal valve, we can understand that an actuator (or, in other words, a part that performs a movement in a specific direction) […]
Canique Climat: A Unique temperature/humidity sensor or ultra low power systems
https://www.electronics-lab.com/canique-climat-a-unique-temperature-humidity-sensor-or-ultra-low-power-systems/
As a maker, you may have come across various IoT temperature and humidity monitors with low-power consumption. Canique Climat is a unique sensor that features ultra-low power consumption of only 2.5uA when powered by a 1.25V battery. The latest revision offers: reduced quiescent current from 9.5µA to 2.5µA (@ 1.25V) reduced ripple voltage during RX […]
STEP-MXO2 FPGA Development Board for Educational Learning
https://www.electronics-lab.com/step-mxo2-fpga-development-board-for-educational-learning/
EIM technology has come up with STEP-MXO2 FPGA development board, a compact, breadboard-friendly, and easy-to-learn hardware design platform built around the Lattice MachXO2 FPGA. It is targeted mainly for educational purposes. Hence, it offers several features that allow users to implement a wide range of designed circuits, from simple circuits to various creative applications. STEP-MXO2 […]
Epishine receives 80 million SEK (EUR 8 million) – AxSol becomes largest individual shareholder
https://www.electronics-lab.com/epishine-receives-80-million-sek-eur-8-million-axsol-becomes-largest-individual-shareholder/
Epishine’s organic solar cells for indoor use meet the need for a wireless renewable energy source for the rapidly growing IoT-market. Epishine has developed a pioneering, patented process for printing organic solar cells with industry-leading low-light efficiency. They have just launched their first product on the world market: a small-scale solar cell that harvests indoor […]
E-PEAS New Buck-Boost ICs enables Highly Efficient Energy Harvesting from Solar & Vibrational Sources
https://www.electronics-lab.com/e-peas-introduces-versatile-new-buck-boost-ics-for-highly-efficient-energy-harvesting-from-solar-vibrational-sources/
Expanding its portfolio of advanced power management ICs (PMICs) for energy harvesting applications, e-peas has announced two new devices capable of further pushing the performance envelope. The RF AEM30330, Vibration AEM30330 and solar AEM10330 PMICs both utilize a buck-boost architecture. This enables them to cover a greater range of input voltage levels (from 100mV right […]
TPSM82823 – 5.5V input, 3-A step-down module with integrated inductor in tiny package
https://www.electronics-lab.com/tpsm82823-5-5v-input-3-a-step-down-module-with-integrated-inductor-in-tiny-package/
The TPSM8282x device family consists of a 1-A, 2-A, and 3-A step-down converter MicroSiP™ power modules optimized for small solution size and high efficiency. The power modules integrate a synchronous step-down converter and an inductor to simplify design, reduce external components and save PCB area. The low-profile and compact solution is suitable for automated assembly […]