Olimex launched ESP32-S2-DevKit-Lipo-USB Development Board
https://www.electronics-lab.com/olimex-launched-esp32-s2-devkit-lipo-usb-development-board/
ESP32-S2-DevKit-Lipo-USB is an ESP32-S2 based development board with USB host and device functionality USB-OTG ESP32-S2 is a highly integrated, low-power, single-core Wi-Fi Microcontroller SoC, designed to be secure and cost-effective, with high performance and a rich set of IO capabilities. Compared to ESP32, ESP32-S2 is only single-core and misses the Ethernet and Bluetooth connectivity, but […]
Industrial Shields Raspberry Pi UPSberry
https://www.electronics-lab.com/industrial-shields-raspberry-pi-upsberry/
Industrial Shields Raspberry Pi UPSberry offers a 10 second of UPS saver using input from Raspberry Pi. This Raspberry Pi UPS shield is a Plug-and-Play UPS smart shield including a Real-Time Clock (RTC) for Raspberry Pi. The Raspberry Pi operates at 12Vdc or 24Vdc supply voltage. This Raspberry Pi can avoid any SD corruption issue […]
Eaton SMBJ 600W Transient Voltage Suppressors
https://www.electronics-lab.com/eaton-smbj-600w-transient-voltage-suppressors/
Eaton SMBJ 600W Transient Voltage Suppressors offer less than 1μA typical IR above 10V, and fast response time, typically less than 1.0ps from 0V to VBR minimum. The series provides 600W peak pulse power capability at 10/1000μs waveform and excellent clamping capability. The low-profile SMB UL94V-0 packages are designed for surface-mounted applications to optimize board […]
Quectel RM50xQ Global 5G Modules are available
https://www.electronics-lab.com/quectel-rm50xq-global-5g-modules-are-available/
Quectel RM50xQ Global 5G Modules adopts the 3GPP Release 15 LTE technology to support both 5G Non-Standalone Architecture (NSA) and Standalone Architecture (SA) modes. These modules are optimized specially for IoT/eMBB applications. The RM50xQ modules are compatible with LTE-A Cat 6 module EM06, Cat 12 module EM12 and EM120R-GL, and Cat 16 module EM160R-GL. This enables the […]
INA190-Q1, 40V, bi-directional, ultra-precise current sense amplifier
https://www.electronics-lab.com/ina190-q1-40v-bi-directional-ultra-precise-current-sense-amplifier/
The INA190-Q1 is an automotive, low-power, voltage-output, current-shunt monitor (also called a current-sense amplifier). This device is commonly used for monitoring systems directly connected to an automotive 12-V battery. The INA190-Q1 can sense drops across shunts at common-mode voltages from –0.2 V to +40 V, independent of the supply voltage. In addition, the input pins […]
60V Input – 5V @ 50mA Output High Voltage Fixed Output Regulator
https://www.electronics-lab.com/project/60v-input-5v-50ma-output-high-voltage-fixed-output-regulator/
This is a high voltage regulator project that provides 5V regulated output with a load capacity of 50mA from input supply 10V to 60V. The project is based on the ZXTR1005K4 regulator which is fully integrated into a TO252 package. We have tested this project with 60V DC input, but the project can take higher […]
Providing Balance with the NX8MM-D168
https://www.electronics-lab.com/providing-balance-with-the-nx8mm-d168/
It may difficult to find a balance when searching for the perfect platform to begin a new project. Trying to balance price, power, and optimal performance while ensuring the end-product accurately represents a company poses a challenge for many out there. To help make this decision easier, we are proud to announce the NX8MM-D168. Features […]
Make your Raspberry Pi Pico Project with 5 Free Pico using Seeed Fusion’s PCB Assembly Service
https://www.electronics-lab.com/make-your-raspberry-pi-pico-project-with-5-free-pico-using-seeed-fusions-pcb-assembly-service/
Raspberry Pi launched its own MCU RP Pico (Raspberry Pi Pico) featuring the RP2040 SoC back in January. Since then, Pico has become quite popular and a lot of platforms are coming up with their support to Raspberry Pi Pico. Hence, the RP Pico is all about customization of its functionalities and more. The PICO […]
The Tiny Yet Powerful tArmDuino Features an STML071 MCU
https://www.electronics-lab.com/the-tiny-yet-powerful-tarmduino-features-an-stml071-mcu/
When you think of a tiny Arduino, all you expect is as many Arduino features as possible that can be large flash memory, programming connections, and obviously smaller board size. Developer Doctek designed a similar Arduino powered by ultra-low-power 32-bit MCU ARM Cortex-M0+ STM32L071KBU. Initially, the project used STM32L031G6 microprocessor but started facing several problems on the […]
CM Hunter – Raspberry Pi Compute Module 4 board with ISO interfaces
https://www.electronics-lab.com/cm-hunter-raspberry-pi-compute-module-4-board-with-iso-interfaces/
Andreas Eberle and his team have created a new Raspberry Pi Compute Module 4 board with ISO interfaces: the CM Hunter. “This is not just another Raspberry PCB,” says Andreas Eberle, as he emphasized that the powerful design tool is not just another IO board that requires you to buy so many different HAT modules. […]