Glasgow Interface Explorer is a Hardware Debugging Tool for Digital Electronics
https://www.electronics-lab.com/glasgow-interface-explorer-is-a-hardware-debugging-tool-for-digital-electronics/
1BitSquared has launched a crowdfunding campaign for a highly capable and extremely flexible open source multi-tool called Glasgow Interface Explorer. Glasgow Interface Explorer for digital electronics is powered by Lattice Semi iCE40 FPGA and created for hardware developers, electronics hobbyists, engineers, tinkerers, and “anyone else who wants to communicate with a wide selection of digital […]
Headphone Amplifier For DAC Converter
https://www.electronics-lab.com/headphone-amplifier-for-dac-converter/
This is a headphone amplifier project for audio digital-to-analog converters (DACs) with differential voltage outputs. This circuit converts the differential voltage output of the DAC to a single-ended, ground-referenced signal and provides the additional current necessary for low-impedance headphones. Project is built using OPA1688 low distortion, high-drive Sound Plus audio amplifier. The circuit tested with […]
Maxim Integrated MAX17623/MAX17624 Evaluation Kits
https://www.electronics-lab.com/maxim-integrated-max17623-max17624-evaluation-kits/
Maxim Integrated MAX17623/MAX17624 Evaluation Kits is configured to evaluate the MAX17623/MAX17624 Step-Down Converters’ operation. The MAX17623/MAX17624 Step-Down Converters are part of the Himalaya series of products that enable cooler, smaller, and simpler power supply solutions. The devices are configured to demonstrate optimum performance and component sizes in the Evaluation Kits. The Maxim MAX17623/MAX17624 Evaluation Kits […]
Texas Instruments TLV767 Positive Voltage Linear Regulators
https://www.electronics-lab.com/texas-instruments-tlv767-positive-voltage-linear-regulators/
Texas Instruments TLV767 Precision Positive Voltage Linear Regulators are a wide input linear voltage regulator that supports an input voltage range from 2.5V to 16V and up to 1A of load current. The output range is from 0.8V to 6.6V or up to 13.6V in the adjustable version. Additionally, the TLV767 has a 1% output […]
RGBDuino UNO and RGBDuino RGB Shield: Add Light and Questionable Arduino PCB
https://www.electronics-lab.com/rgbduino-uno-and-rgbduino-rgb-shield-add-light-and-questionable-arduino-pcb/
Now, from my writing experience here at eLab, I have dealt with some funny and interesting concepts, but nothing quite like what I am about to show you. But bear with me here, aside from the questionably looking electronics you are about to glance, there might be something useful to light up your Arduino projects. […]
Watchy: The Open-Source E-Paper Watch
https://www.electronics-lab.com/watchy-the-open-source-e-paper-watch/
The good thing about Tindie is that allows all of us to creatively showcase and sell our most promising projects. I cannot stress how awesome it is to have such a market online, for our inventions! As a good example of its usefulness, we will glance today at an e-paper watch that has the potential […]
Meet Qomu – A complete SoC that easily fits inside a USB port
https://www.electronics-lab.com/meet-qomu-a-complete-soc-that-easily-fits-inside-a-usb-port/
Tomu family of USB devices has recently introduced a small form factor board that is not only a single MCU or an FPGA, but a complete System-on-chip that fits easily inside a USB port. The tiny compact board called Qomu, is a capable USB device that integrates an EOS S3 low-power MCU and an eFPGA […]
Headphone Amplifier For DAC Converter
https://www.electronics-lab.com/project/headphone-amplifier-for-dac-converter/
This is a headphone amplifier project for audio digital-to-analog converters (DACs) with differential voltage outputs. This circuit converts the differential voltage output of the DAC to a single-ended, ground-referenced signal and provides the additional current necessary for low-impedance headphones. Project is built using OPA1688 low distortion, high-drive Sound Plus audio amplifier. The circuit tested with […]
HAPPY NEW YEAR 2021 from electronics-lab.com
https://www.electronics-lab.com/happy-new-year-2021-from-electronics-lab-com/
The electronics-lab.com team wishes you a Happy and Prosperous New Year 2021!
Texas Instruments UCC27288 Half-Bridge Driver
https://www.electronics-lab.com/texas-instruments-ucc27288-half-bridge-driver/
Texas Instruments UCC27288 Half-Bridge Driver is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3.5A peak sink current and 2.5A peak source current, along with low pull-up and pull-down resistance, […]