STONE HMI ESP32 Weather Station using STVC101WT-01 TFT LCD module
https://www.electronics-lab.com/stone-tft-lcd-hmi-esp32-weather-station-using-stvc101wt-01/
In the application of this paper, I will use the STONE TFT LCD screen, esp32 microprocessor, photosensitive resistance sensor, and DHT11 temperature and humidity sensor to realize the real-time monitoring of the surrounding environment and push the collected data to the TFT LCD screen for display. The communication mode of esp32 and STONE TFT LCD […]
Lead Acid Battery Voltage Monitor using ATMEGA328
https://www.electronics-lab.com/project/lead-acid-battery-voltage-monitor-using-atmega328/
Monitoring the voltage level of a 12V Lead Acid Battery (SLA) is easy and simple with this project. The board is made using an ATMEGA328 micro-controller and 12 x 5mm LEDs. The ATMEGA328 microcontroller senses the analog voltage on A3 Analog pin and drives 12 LEDs connected to digital I/O pins of the chip. Input […]
Analog Light Sensor + Light Sensitive Switch using OPT101
https://www.electronics-lab.com/analog-light-sensor-light-sensitive-switch-using-opt101/
You may have seen many light-sensitive switch circuits based on an LDR sensor. Usually, the sensitivity of the LDR based light sensor is poor. We wanted a very sensitive light switch hence we decided to make a circuit based on a light sensor rather than LDR. After a little research on the internet, we found […]
Texas Instruments TPS92610-Q1 Automotive Single-Channel LED Drivers
https://www.electronics-lab.com/texas-instruments-tps92610-q1-automotive-single-channel-led-drivers/
Texas Instruments TPS92610-Q1 Automotive Single-Channel LED Driver is a simple and ideal solution to deliver constant current for a single LED string with full LED diagnostics. The device operates from an automotive car battery. The TPS92610-Q1 addresses different requirements using the TPS9261x-Q1, TPS9263x-Q1, and TPS9283x-Q1 devices within the one-fails–all-fail feature. The TPS92610-Q1 devices are AEC-Q100 […]
Analog Light Sensor + Light Sensitive Switch using OPT101
https://www.electronics-lab.com/project/analog-light-sensor-light-sensitive-switch/
You may have seen many light-sensitive switch circuits based on an LDR sensor. Usually, the sensitivity of the LDR based light sensor is poor. We wanted a very sensitive light switch hence we decided to make a circuit based on a light sensor rather than LDR. After a little research on the internet, we found […]
Optically Isolated Analog Input Module for Arduino
https://www.electronics-lab.com/optically-isolated-analog-input-module-for-arduino/
This is an isolated analog input module that is useful for interfacing Analog signals of various types originated from analog sensors and field devices. The module is very useful for in-process controls, factory automation, industrial applications, etc. Interfacing an analog voltage, an analog sensor to Arduino or other various microcontrollers with optical isolation is very […]
Optically Isolated Analog Input Module for Arduino
https://www.electronics-lab.com/project/optically-isolated-analog-input-module-for-arduino/
This isolated analog input module is useful for interfacing Analog signals of various types originating from analog sensors and field devices. The module is beneficial for in-process controls, factory automation, industrial applications, etc. Interfacing an analog voltage, an analog sensor to Arduino or other various microcontrollers with optical isolation is very easy with this module. […]
Ryzen Embedded V2000 with AMD Radeon™ Promises Double Performance
https://www.electronics-lab.com/ryzen-embedded-v2000-with-amd-radeon-promises-double-performance/
AMD has announced their new Ryzen Embedded V2000 processors with 7nm fabricated Zen 2 cores. They have designed four new processors for embedded devices. Ryzen Embedded V2000 doubles the multi-threaded performance-per-watt and offers up to 30 percent better single-thread CPU performance compared to the previous-gen V1000. Also, the graphics performance is expected to have a […]
Broadcom’s single-silicon photo-multiplier is best suited for the detection of low-level pulsed light sources
https://www.electronics-lab.com/broadcoms-single-silicon-photo-multiplier-is-best-suited-for-the-detection-of-low-level-pulsed-light-sources/
The Broadcom® AFBR-S4N33C013 is a single-silicon photo-multiplier (SiPM) used for ultra-sensitive precision measurement of single photons. The active area is 3.0 mm × 3.0 mm. A high packing density of single chips is achieved using through-silicon-via (TSV) technology and a chip-sized package (CSP). Larger areas can be covered by tiling multiple AFBR-S4N33C013 CSPs almost without any edge […]
Affordable Plug-and-Play LiDAR Camera: Onion Tau
https://www.electronics-lab.com/affordable-plug-and-play-lidar-camera-onion-tau/
Onion Corporation, the company best known for its computing and IoT connectivity devices is currently crowdfunding their LiDAR depth camera system named the Onion Tau. Onion Tau Camera is a 3D depth-sensing camera. It is capable of producing 3D depth data rather than color frames. The company claims it to be a USB-based and plug-and-play […]