1A Over Current Protection Load Switch
https://www.electronics-lab.com/project/1-a-over-current-protection-load-switch/
The Over-current limit load switch project presented here provides full protection to devices and loads from access load conditions. The default current limit is set to 1 Amp, however, this load limit is adjustable from 0.4A to 2A with the help of R4 ISET resistor. When an overload condition occurs circuit responds to that overload […]
OPAMP Comparators
https://www.electronics-lab.com/article/opamp-comparators/
Introduction In most of the previous operational amplifier tutorials, the circuits had a feedback loop to the inverting input. This design is the most common because it provides indeed stability and avoids undesirable saturating effects and, it is also common to call it the linear mode. On the other hand, when no feedback is applied […]
Miniature Sensor Module Measures CO2, Temperature and Pressure
https://www.electronics-lab.com/miniature-sensor-module-measures-co2-temperature-and-pressure/
The EE895 sensor module is ideal for use in climate measuring devices. Pressure and temperature compensation ensure a high CO2 measuring accuracy. The new EE895 sensor module from E+E Elektronik measures CO2, temperature and ambient pressure. The small 3-in-1 module is an ideal choice for measuring instruments used for ventilation and climate control, in building […]
TCA4307 Hot-Swappable I2C Bus and SMBus Buffer
https://www.electronics-lab.com/tca4307-hot-swappable-i2c-bus-and-smbus-buffer/
Texas Instruments’ buffer features stuck bus recovery Texas Instruments’ TCA4307 is a hot-swappable I2C bus buffer that supports I/O card insertion into a live backplane without corruption of the data and clock lines. Control circuitry prevents the backplane-side I2C lines (in) from being connected to the card-side I2C lines (out) until a stop command or […]
Water Contact Indicator Tape
https://www.electronics-lab.com/water-contact-indicator-tape/
Water Contact Indicator Tape from 3M™ changes color with water contact without performance degradation in high humidity exposure 3M™ Water Contact Indicator Tape is a tape that changes color from white to red upon contact with water. It is designed to withstand heat and humidity aging without giving water indications. The tape permanently changes from […]
Jake Wachlin Demonstrates His CAN Controlled Dual Closed- Loop Motor Controller
https://www.electronics-lab.com/jake-wachlin-demonstrates-his-can-controlled-dual-closed-loop-motor-controller/
Jake Wachlin has posted on Hackaday a CAN Controlled Dual Closed-Loop Motor Controller. CAN is an acronym for Controller Area Network. This is a robotic vehicle bus standard designed to enable microcontrollers and devices to communicate with each other’s applications without a host computer. This mechanism is implemented in the CAN controlled dual closed-loop motor […]
Adafruit BrainCraft HAT – Machine Learning for Raspberry Pi 4
https://www.electronics-lab.com/adafruit-braincraft-hat-machine-learning-for-raspberry-pi-4/
Think about what would be useful when developing your machine learning projects for the Raspberry Pi, maybe a camera, a display, some input and output sound capabilities or even an easy means to easily inject the results of your algorithms into servo motors or other devices. Look no further, as the BrainCraft HAT gives you […]
STWIN SensorTile Wireless Industrial Node development kit and reference design for industrial IoT applications
https://www.electronics-lab.com/stwin-sensortile-wireless-industrial-node-development-kit-and-reference-design-for-industrial-iot-applications/
What is not to love about aggregating boards? They ease the development process, giving you a necessary time boost because you have a board with some of the components you may need right there, ready to be used in your new application! This is why you need to take a look at the STWIN SensorTile. […]
iWave Launches Industry Latest High-End FPGA SOM Based on Arria 10 GX FPGA
https://www.electronics-lab.com/iwave-launches-industry-latest-high-end-fpga-som-based-on-arria-10-gx-fpga/
iWave Systems, a global leader in the design and manufacture of cutting edge FPGA solutions, is launching a new System on module based on the powerful Intel Arria 10 FPGA GX devices. The Arria 10 FPGA SOM is power-packed with up to 1150K Logic Elements, duel DDR4 RAM with 64 bit and 32-bit storage capabilities. […]
AAEON: Next Generation Embedded Solutions Powered by Intel Technology
https://www.electronics-lab.com/aaeon-next-generation-embedded-solutions-powered-by-intel-technology/
AAEON, a leader in embedded solutions, announces up-coming products featuring the 11th Generation Intel Core processors (formerly Tiger Lake) and Intel Atom x6000E series processors, Intel Pentium and Celeron N and J series processors (formerly Elkhart Lake). These next-generation solutions provide greater performance, flexibility and a host of Intel technologies to power computing at the […]