802.11bgn Cortex®-M4F Wi-Fi Modules
https://www.electronics-lab.com/802-11bgn-cortex-m4f-wi-fi-modules/
TAIYO YUDEN’s modules feature an onboard antenna and filter to reduce the components required for wireless designs TAIYO YUDEN’s 802.11bgn Cortex-M4F Wi-Fi modules feature an onboard antenna and filter to reduce the number of supported components to be integrated into wireless designs. Based on the NXP 88MW320, embedded Arm® Cortex-M4F processor can help drive applications. […]
Infineon, Fingerprint Cards join forces to drive deployment of biometric cards
https://www.electronics-lab.com/infineon-fingerprint-cards-join-forces-to-drive-deployment-of-biometric-cards/
Biometric payment cards with integrated fingerprint sensor make contactless payments more convenient, more secure and hygienic. The contactless card remains in the hands of the cardholder throughout the entire payment transaction, while eliminating the need for PIN entries or signatures to authorize even high-value payments. Infineon Technologies AG and Fingerprint Cards AB have joined forces […]
RD6006 Digital Control Switch Adjustable Power Supply starts from just $57
https://www.electronics-lab.com/rd6006-digital-control-switch-adjustable-power-supply-starts-from-just-57/
The good life, they say, sometimes does not cost a fortune, with the new RD6006 from Ruideng, you can precisely program the amount of power needed for your project via USB / WiFi communication or via the embedded control panel. The RD6006 digital control Switching Adjustable power supply is a programmable, DIY Flavoured, bench PSU […]
DC205 – Precision DC voltage source
https://www.electronics-lab.com/dc205-precision-dc-voltage-source/
The DC205 low-noise, high-resolution DC voltage source is the right tool when a precision bias source is needed. Its bipolar, four-quadrant output delivers up to 100 V with 1 µV resolution and up to 50 mA of current. In 4-wire mode (remote sense), the instrument corrects for lead resistance delivering accurate potential to your load. […]
Adjustable Constant Current LASER Diode/LED driver
https://www.electronics-lab.com/project/adjustable-constant-current-laser-diode-led-driver/
I was testing a couple of low-cost laser diodes that come from china and I was wondering why those diodes don’t have any protection/driver circuitry. Those diodes come with a simple series resistor for current control which is not a good idea nor stable. Laser diodes are harmful and should have some sort of constant […]
Microchip MCP2518FD : External CAN FD Controller with SPI Interface
https://www.electronics-lab.com/microchip-mcp2518fd-external-can-fd-controller-with-spi-interface/
The MCP2518FD is a cost-effective and small-footprint External CAN FD Controller that can be easily added to a microcontroller with an available SPI interface. Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking a CAN FD peripheral or that doesn’t have enough CAN FD channels. The MCP2518FD supports […]
Delta T31SN 100W DC/DC family in compact 1/32 brick format
https://www.electronics-lab.com/delta-t31sn-100w-dc-dc-family-in-compact-1-32-brick-format/
T31SN series of 1/32 Brick, 9~53V input, single output, non-isolated DC/DC converters, are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. This product family provides up to 100 watts of power or 8A of output current. With creative design technology and optimisation of component placement, these […]
Meet the Tigard Board; A new FT2232H-Based USB Serial Adapter/Debuggers
https://www.electronics-lab.com/meet-the-tigard-board-a-new-ft2232h-based-usb-serial-adapter-debuggers/
SecurityHardware.com is set to take FT2232H-based USB Serial Adapters and Debuggers to the Next Level. The Portland-based company will soon be launching a Crowdfunding campaign for its latest design, an open-source FTDI FT223H-based multi-protocol, multi-voltage hardware hacking device called Tigard. Tigard is a one-stop board for developers looking for something a little more than the […]
Launchpad Launches as a Cheap Arduino Nano alternative
https://www.electronics-lab.com/launchpad-launches-as-a-cheap-arduino-nano-alternative/
We can’t seem to get enough of Arduino Nano. It has been a “go to” boards for developers since its launch in 2008. We see developers and engineers try to upgrade the Arduino. This has moved Clyde D. Corpuz to launch the Launchpad, which is a small, Arduino compatible microcontroller development board that does away with […]
Developer Board 4 V3 – Embedded Platform based on Qualcomm Snapdragon 410E SoC
https://www.electronics-lab.com/developer-board-4-v3-embedded-platform-based-on-qualcomm-snapdragon-410e-soc/
Developer Board 4 V3 is a single board computer based on Qualcomm Snapdragon 410E SoC with 2GB DDR3, 16GB EMMC, HDMI, MIPI-CSI, 40- and 60-pin expansion connectors. Fully structurally compatible with the 96boards CE standard.It features advanced processing power, WLAN, Gigabit Ethernet, Bluetooth, GPS, all packed into a board the size of a credit card.The […]