Kiwi-DVK OpenWrt Development Kit Features Qualcomm IPQ9570 SoC, Wi-Fi 7 SoM, and 2.5GbE with 48V PoE
https://www.electronics-lab.com/kiwi-dvk-openwrt-development-kit-features-qualcomm-ipq9570-soc-wi-fi-7-som-and-2-5gbe-with-48v-poe/
8devices has recently launched their latest embedded networking board with Qualcomm IPQ9570/QCN9274 SoC featuring Kiwi Wi-Fi 7 System-on-Module available in commercial or industrial temperature range, as well as a development kit based on the module. The Kiwi Development Kit (DVK) is a compact, cutting-edge platform designed for high-performance networking and flexible I/O expansion. The Kiwi-DVK […]
Rutronik RAB7: AI-Powered Sensor Fusion Arduino Shield with Bosch, Infineon, and Sensirion Sensors
https://www.electronics-lab.com/rutronik-rab7-ai-powered-sensor-fusion-arduino-shield-with-bosch-infineon-and-sensirion-sensors/
With a total of seven environmental and inertial sensors facilitated by Bosch, Infineon, and Sensirion, the fully open-source hardware Arduino shield known as the Rutronik Adapter Board RAB7 is intended for AI-powered Sensor Fusion application. The RAB7 Adapter Board can be readily integrated with other Rutronik System Solutions base boards and adapter boards thanks to […]
Waveshare RA4M1-Zero Mini Development Board Offers 48MHz ARM MCU with Arduino Support, Secure Boot, FPU, and CAN Bus
https://www.electronics-lab.com/waveshare-ra4m1-zero-mini-development-board-offers-48mhz-arm-mcu-with-arduino-support-secure-boot-fpu-and-can-bus/
Waveshare has introduced the RA4M1-Zero, a compact, cost-effective Mini Development Board built around the 32-bit Renesas RA4M1 MCU, based on the ARM Cortex-M4 architecture with a 48MHz operating frequency and a built-in Floating Point Unit (FPU). This was designed in the standard Zero-size form factor (18 x 23.5 mm) created by Waveshare, which is made […]
FlippenHeimer Turns Flipper Zero into an Ultra-Compact Geiger Counter Module
https://www.electronics-lab.com/flippenheimer-turns-flipper-zero-into-an-ultra-compact-geiger-counter-module/
Designed to be integrated with the multi-purpose electronic tool Flipper Zero, the FlippenHeimer functions as a miniature Geiger counter add-on module. Using the Flipper’s display and power supply, users can keep an eye on the levels of beta and gamma radiation, making it a portable radiation detector. The FlippenHeimer, which draws its foundation on a […]
LILYGO T-LoRa Pager: ESP32-S3 IoT Board with LoRa, GNSS, NFC, and IMU Support
https://www.electronics-lab.com/lilygo-t-lora-pager-esp32-s3-iot-board-with-lora-gnss-nfc-and-imu-support/
The T-LoRa Pager from LILYGO is a compact IoT development board designed for applications such as asset tracking, remote sensing, and portable communication. It is powered by the ESP32-S3 microcontroller and comes with 16MB flash and 8MB PSRAM. Key hardware features include an RTC circuit, GPIO expansion headers, a battery management system, an audio codec, […]
Boardcon Idea3576 SBC Features Rockchip RK3576 SoC with 6 TOPS NPU, Dual Ethernet, and 4K Multimedia Support
https://www.electronics-lab.com/boardcon-idea3576-sbc-features-rockchip-rk3576-soc-with-6-tops-npu-dual-ethernet-and-4k-multimedia-support/
The Boardcon Idea3576 is a single-board computer (SBC) built around the Rockchip RK3576 processor, featuring a hybrid octa-core CPU (4x Cortex-A72 @ 2.2GHz + 4x Cortex-A53 @ 1.8GHz) and a 6 TOPS NPU for AI workloads. It includes an ARM Mali-G52 GPU for graphics rendering and supports machine learning, edge AI, computer vision, and industrial […]
Morse Micro and Gateworks Corporation Introduces Wi-Fi HaLow M.2 Module for Industrial Applications and VeniceFLEX SBC
https://www.electronics-lab.com/morse-micro-and-gateworks-corporation-introduces-wi-fi-halow-m-2-module-for-industrial-applications-and-veniceflex-sbc/
Morse Micro has teamed up with Gateworks Corporation to deliver the GW16159, a rugged, industrial-grade 802.11ah Wi-Fi HaLow M.2 radio module for long-range, low-power wireless communication in IoT applications. Specifically built for use with Gateworks VeniceFLEX single board computers, it connects via an M.2 E-Key 2242 interface using SDIO signalling—not compatible with standard Venice SBCs. The […]
AAEON’s NanoCOM-MTU Hosts 28W Intel Core Ultra CPUs on the COM Express Type 10 Form Factor
https://www.electronics-lab.com/aaeons-nanocom-mtu-hosts-28w-intel-core-ultra-cpus-on-the-com-express-type-10-form-factor/
The world’s first COM Express Type 10 module to host 28W CPUs from the Intel® Core™ Ultra line, the NanoCOM-MTU represents makes a big statement in a small form factor. AAEON, a leading provider of Computer-on-Modules, has today announced the NanoCOM-MTU, a COM Express Type 10 CPU Module powered by Intel® Core™ Ultra processors. Available […]
48V DC Input DC-DC Converter – 5V USB C-Type Output
https://www.electronics-lab.com/project/48v-dc-input-dc-dc-converter-5v-usb-c-type-output/
This DC-DC converter board is specifically designed as a USB C-Type power source, providing a stable 5V output with a maximum current up to 2A. The converter’s wide input voltage range of 4.5V to 48V ensures flexibility and compatibility with various power sources. Key features of the DC-DC converter include excellent load and line regulation, […]
Buck Converter for E-Scooters – 4.5V to 95V input – 5V output
https://www.electronics-lab.com/project/buck-converter-for-e-scooters-4-5v-to-95v-input-5v-output/
This high-voltage buck converter is specifically designed for e-scooter and e-bike control power supply applications, but its versatility also makes it suitable for use in solar energy systems, automotive systems, and industrial power supplies. This converter utilizes the MPS9486 chip, a 4.5V-to-95V-input, 1A-output step-down converter that provides efficient power conversion. The MP9486 chip employs a […]