Trinamic Introduces the TMCM-1617 Servo Controller Module
https://www.electronics-lab.com/trinamic-introduces-tmcm-1617-servo-controller-module/
TRINAMIC Motion Control GmbH & Co. KG announced the TMCM-1617 single-axis servo controller module designed for servo drives with 18A RMS and 8 to 28V DC supply voltage. Achieving high-current loop frequencies to minimize current ripple, the potted module enables smaller electric drives with high dynamics, according to the company. The TMCM-1617 also supports a […]
Saelig Introduces Aaronia AARTOS Drone/UAV Detection System
https://www.electronics-lab.com/saelig-introduces-aaronia-aartos-drone-uav-detection-system/
Customizable drone detection systems with 360deg coverage, wideband sensing to 20GHz, and AI software to avoid false alarms Saelig Company, Inc. has introduced the Aaronia AARTOS Drone Detection System, which can sense airborne drone activity with a virtually unlimited detection range. The AARTOS DDS monitors the entire frequency spectrum (e.g. 100MHz – 20GHz) hundreds of […]
Combat Covin-19, JLCPCB will be here with you!
https://www.electronics-lab.com/combat-covin-19-jlcpcb-will/
JLCPCB is a leading PCB Prototype company in China are attracting increasing people around the world to be our customer and at the same time, we also get much support from them to be the Better JLCPCB, especially during such a tough period due to COVID-19. 1. JLCPCB is in production JLCPCB tried all we […]
SparkFun launches SparkX Qwiic Compatible Board to Enable Stepper Motor Control
https://www.electronics-lab.com/sparkfun-launches-sparkx-qwiic-compatible-board-enable-stepper-motor-control/
SparkFun has announced another experimental SparkX board design, which enables higher motor control on a Qwiic-compatible I2C bus, with support for a built-in emergency stop button, and the capability to drive motors requiring up to 2A. The Qwiic Step is the latest of SparkFun’s entry in the SparkX board family, which are ranges of experimental […]
Seeed Launches an innovative All-in-one Grove Beginner Kit for Arduino
https://www.electronics-lab.com/seeed-launches-innovative-one-grove-beginner-kit-arduino/
Open-Source Hardware manufacturing super-power, Seeed Studio recently announced the launch of a new All-in-one Arduino Kit for Beginners. Designed for both learners and educators, the Grove beginner kit for Arduino aims to make learning Arduino programming fun and simple. According to Seeed, the new kit was designed to help beginners overcome some of the challenges […]
Driving multiple loads with 32 kHz Nano-Power MEMS oscillators
https://www.electronics-lab.com/driving-multiple-loads-32-khz-nano-power-mems-oscillators/
Driving multiple loads from a single oscillator output discussed in this app note from SiTime. Optimizing board space and managing power consumption of wearable devices is critical in sustaining competitiveness within this fast growing consumer segment. With less power consumed, battery life is extended or provides the option to reduce the battery size. MEMSbased reference […]
Ricoh Electronic Devices Company launches the RIOT-001 Environment Sensing Board
https://www.electronics-lab.com/ricoh-electronic-devices-company-launches-riot-001-environment-sensing-board/
Ricoh Electronic Devices Company RIOT-001 Environment Sensing Board is designed to transmit data obtained from a temperature/humidity/pressure sensor (BME280) and an ambient light sensor (MAX44009) via Bluetooth, to tablets or other smart devices. The board also includes a voltage regulator with a battery monitor (RP124) for the measurement of the secondary battery voltage. The RIOT-001 Board […]
Indoor Air Quality Monitoring System
https://www.electronics-lab.com/project/indoor-air-quality-monitoring-system/
I’m quite passionate about air quality monitoring, so whenever I see an interesting air quality monitoring project that could help people stay healthy, while also serving as a good way to learn DIY electronics, I’m always eager to share. Thus, for today’s tutorial, I will chronicle the build process of an Indoor Air Quality Monitoring […]
Norton’s Theorem
https://www.electronics-lab.com/article/nortons-theorem/
Introduction This tutorial is a continuity of our last article about Thevenin’s theorem. In the previous article, we have seen that any linear electrical circuit can be simplified into an elementary circuit that consists of an ideal voltage source in series with resistors. Another very similar model is known as Norton’s theorem, it has been […]
1.09″ 64×128 Monochrome Graphic OLED Display Module – SPI
https://www.electronics-lab.com/1-09-64x128-monochrome-graphic-oled-display-module-spi/
This is a tiny 1.09″ 64×128 Monochrome Graphic OLED Display Module with SPI interface, sold for 9.99 USD. Specifications: 1.09″ 64 X 128 Pixel Interface: 4-Wire Serial SPI Drive IC: CH1115 (Compatible SSD1306) Display Colors：White Graphic OLED Drive Duty: 1/128 Duty 1.09″ 64×128 Monochrome Graphic OLED Display Module – SPI – [Link]