Stratify Toolbox – An all-in-one hardware development tool
https://www.electronics-lab.com/stratify-toolbox-one-hardware-development-tool/
As a hardware developer, I keep a number of tools and gadgets handy such as a USB to UART converter, O-scope, multi-meter, SWD/JTAG programmer, jumper wires as well as a few others depending on the situation. The Stratify Toolbox will replace all of these and more. Features The Stratify Toolbox is a Wi-Fi-enabled, all-in-one hardware/firmware […]
MX100Q Series Compact 4-Channel 210W Power Supplies
https://www.electronics-lab.com/mx100q-series-compact-4-channel-210w-power-supplies/
Mixed-mode regulation merges a switch-mode power conversion design with linear final regulation to give excellent noise and transient characteristics resembling linear supply performance but at greatly reduced weight. Saelig Company, Inc. has announced the introduction of the AIM-TTi MX100Q Series Power Supplies, versatile 4-output laboratory power sources which use mixed mode regulation to provide up […]
Program ATtiny 0-Series Chips with a Miniature UPDI Dongle
https://www.electronics-lab.com/program-attiny-0-series-chips-miniature-updi-dongle-2/
Thanks to their tiny size and improved capabilities, the ATtiny-0-Series of microcontrollers have been a delight for designers and DIYers looking for a microcontroller with the ease of use associated with the Arduino boards, but with a way smaller form factor associated with ATtiny microcontrollers. Along with the ATtiny-1-series, the ATtiny-0-Series microcontrollers were meant to […]
Alpha and Omega Semiconductor Introduces 18V 2A, and 3A EZBuck
https://www.electronics-lab.com/alpha-omega-semiconductor-introduces-18v-2a-3a-ezbuck/
Synchronous DC/DC Buck Regulators Feature Lower Quiescent Current and Proprietary Light Load Mode to Achieve up to 6% Higher Efficiency in Standby Mode Alpha and Omega Semiconductor (AOS) introduced AOZ6682CI and AOZ6683CI. These devices are high efficiency, simple-to-use synchronous buck regulators. The AOZ6682CI and AOZ6683CI are both available in an ultra-thin, thermally enhanced TSOT23-6 package […]
Program ATtiny 0-Series Chips with a Miniature UPDI Dongle
https://www.electronics-lab.com/project/program-attiny-0-series-chips-miniature-updi-dongle/
Thanks to their tiny size and improved capabilities, the ATtiny-0-Series of microcontrollers have been a delight for designers and DIYers looking for a microcontroller with the ease of use associated with the Arduino boards, but with a way smaller form factor associated with ATtiny microcontrollers. Along with the ATtiny-1-series, the ATtiny-0-Series microcontrollers were meant to […]
High-Performance FPGA Modules with SuperSpeed USB 3.0 Interfaces
https://www.electronics-lab.com/high-performance-fpga-modules-superspeed-usb-3-0-interfaces/
The capabilities of sensors and sensing systems have grown considerably in recent years, making data acquisition (DAQ) systems increasingly complex as the amount of data flowing and the processing required in these systems multiplies. FPGA devices are perfectly suited to high performance DAQ because of their flexibility, configurability, performance, and parallel processing capabilities. Data ingress […]
Temperature sensor accurate to 0.25°C
https://www.electronics-lab.com/temperature-sensor-accurate-0-25c/
The STTS22H temperature sensor from STMicroelectronics offers high accuracy with low operating and standby current and flexible operating modes. By Gina Roos @ electronicproducts.com STMicroelectronics has launched its STTS22H temperature sensor with typical temperature-reading accuracy of 0.25°C and low operating and standby current. The device enhances temperature and heat-flow monitoring in asset trackers, shipping-container loggers, HVAC systems, […]
Compact Ryzen V1000 system starts at $689 with pre-loaded Ubuntu
https://www.electronics-lab.com/compact-ryzen-v1000-system-starts-689-pre-loaded-ubuntu/
Simply NUC, the company behind several Intel NUC based SBCs like the Apollo Lake based NUC 8 Rugged, recently announced the launch of a new mini-computers codenamed; “Sequoia”. The Sequoia is Simply NUC’s first AMD-powered mini computer and it is aimed at applications around AI, Edge Analytics, robotics, POS, digital signage and industrial IoT […]
Boardcon’s EM-IMX8M-Mini SBC Comes With Lots Of Customization
https://www.electronics-lab.com/boardcons-em-imx8m-mini-sbc-comes-lots-customization/
Boardcon‘s new EM-IMX8M-MINI is based on NXP’s energy-efficient i.MX8M Mini ARM Cortex A53 processor. The iMX8M SBC has 2GB LPDDR4 and 8GB of eMMC flash with 2x USB 2.0, GbE. Display output is via MIPI LCD, PCIe. There is also optional support for SSD/4G. It runs Linux 4.14.98 and QT 5.0. EM-IMX8M-MINI SBC and its […]
First mycusini 3D Choco printers are shipped already
https://www.electronics-lab.com/first-mycusini-3d-choco-printers-shipped-already/
The startup Print2Taste has kept its promise also in its second Kickstarter campaign. Several backers already received their 3D Choco printer. According to Print2Taste the project team did a great job – the shipment started even ahead of schedule. mycusini is the first consumer 3D Choco printer which came up successfully on Kickstarter. In terms […]