STM32CubeProgrammer all- in-one software tool
https://www.electronics-lab.com/stm32cubeprogrammer-one-software-tool/
STM32CubeProgrammer (STM32CUBEPROG) is an all-in-one multi-OS software tool for programming STM32 microcontrollers. It provides an easy-to-use and efficient environment for reading, writing and verifying device memory through both the debug interface (JTAG and SWD) and the bootloader interface (UART and USB). STM32CubeProgrammer offers a wide range of features to program STM32 microcontroller internal memories (such […]
Isolated Power Supply for RS485, RS422, RS232, SPI, I2C and Power LAN
https://www.electronics-lab.com/isolated-power-supply-rs485-rs422-rs232-spi-i2c-power-lan/
Mini Isolated Power Supply is designed for CAN, RS-485, RS-422, RS-232, SPI, I2C, Low-Power LAN applications. The power supply provides +/- 5.50 V DC symmetrical outputs with load current 500mA from 5V DC input. The project is built using SN6505A IC from Texas instruments. The SN6505A is a low-noise, low-EMI push-pull transformer driver, specifically designed […]
Isolated Power Supply for RS485, RS422, RS232, SPI, I2C and Power LAN
https://www.electronics-lab.com/project/isolated-power-supply-rs485-rs422-rs232-spi-i2c-power-lan/
Mini Isolated Power Supply is designed for CAN, RS-485, RS-422, RS-232, SPI, I2C, Low-Power LAN applications. The power supply provides +/- 5.50 V DC symmetrical outputs with load current 500mA from 5V DC input. The project is built using SN6505A IC from Texas instruments. The SN6505A is a low-noise, low-EMI push-pull transformer driver, specifically designed […]
18 Most Helpful Raspberry Pi Tutorials
https://www.electronics-lab.com/18-helpful-raspberry-pi-tutorials/
After having grazed the maker’s ecosystem in the year 2012, the Raspberry Pi has attracted a huge number of hobbyists and tinkerers all over the world. It has been the world’s most popular single board computer and a close competitor to the Arduino since then. If you have never heard of the Raspberry Pi, then look […]
Trill – an open-source 3G mobile phone
https://www.electronics-lab.com/trill-open-source-3g-mobile-phone/
This is a complete GSM/3G mobile phone, based on the ioNode. Features 128 x 64 OLED display * 16 buttons + 5-way mini-joystick * Microphone & earpiece * MicroSD card slot * MicroSIM card slot * MP3 decoder, headphone amplifier and 3.5mm stereo jack * Vibrator Trill – an open-source 3G mobile phone – [Link]
SMARC module for Industrial Ethernet
https://www.electronics-lab.com/smarc-module-industrial-ethernet/
eCOUNT embedded’s ES-1XXX is the company’s first Computer-on-Module family to support the SMARC 2.0 standard from the SGET. The modules are equipped with ARM Cortex-A9 based Intel Cyclone V SoCs (formerly Altera), which integrate a configurable FPGA. By integrating the Intel Cyclone V SoCs on SMARC Computer-on-Modules customers benefit from an application-ready ultra-low-power platform for extremely cost-efficient custom IIoT […]
Arduino controlled Dual Mono AK4490 DAC (part 3)
https://www.electronics-lab.com/arduino-controlled-dual-mono-ak4490-dac-part-3/
Here’s the part 3 of Dimitris’ Arduino controlled Dual Mono AK4490 DAC project. If you missed part 1 and part 2, check them out. Following up on Part 2, it’s time to talk about the output stage. This output stage is the brainchild of my friend Kostas, all I did was lay out the PCB. It […]
Firefly – an annoying little thing
https://www.electronics-lab.com/firefly-annoying-little-thing/
Here’s a tiny pcb that produces an annoying sound using a piezo buzzer and a ATtiny13 microcontroller. It uses an LED, piezo buzzer, ATTINY13 Atmel microcontroller, a very small amount of Arduino code, and a coin cell battery that should last about a week. Battery life could be improved, with longer sleep times. The device […]
EAGLE 8.7 – Parametric 2D & 3D model generation, library.io, more!
https://www.electronics-lab.com/eagle-8-7-parametric-2d-3d-model-generation-library-io/
Today we’re proud to announce the release of EAGLE 8.7 and what is quite possibly one of the biggest releases we’ve had to-date, this time focused (largely) on libraries and library development (and what that means for 3D modeling of your finished PCB)! But before we get into it, let me share a thought — […]
InnoComm NXP i.MX8M System on Module – An Advanced Video Processing SoM with Connectivity
https://www.electronics-lab.com/innocomm-nxp-mx8m-system-module-advanced-video-processing-som-connectivity/
Last year (2017), NXP announced its new applications processors, the i.MX 8 series. The i.MX 8M family of applications processors based on Arm® Cortex®-A53 and Cortex-M4 cores provide industry-leading audio, voice and video processing for applications that scale from consumer home audio to industrial building automation and mobile computers. NXP announced a select group of partners that […]