PAC1934 – Microchip’s New Power-Monitoring IC Measures Power With 99% Accuracy
https://www.electronics-lab.com/pac1934-microchips-new-power-monitoring-ic-measures-software-power-99-accuracy/
Microchip recently developed a precision power-and-energy-monitoring chip – PAC1934. The PAC1934 is a four channel power/energy monitor with current sensor amplifier and bus voltage monitors that feed high-resolution ADC. It works in conjunction with a Microchip software driver that is fully compatible with the Energy Estimation Engine (E3) built into the Windows 10 operating system. The whole […]
4 Digit 7 Segment Display Shield For Arduino Nano
https://www.electronics-lab.com/4-digit-7-segment-display-shield-arduino-nano/
4 Digit Multiplexed display shield for Arduino Nano with on board 2 tactile switches and LM35 temperature sensor. This shield helps you to develop many projects that require 4 digit display. For example a thermometer can be made using on board LM35 sensor. 7 Seven segment multiplexed display is a tiny board and has been […]
4 Digit 7 Segment Display Shield For Arduino Nano
https://www.electronics-lab.com/project/4-digit-7-segment-display-shield-arduino-nano/
4 Digit Multiplexed display shield for Arduino Nano with on board 2 tactile switches and LM35 temperature sensor. This shield helps you to develop many projects that require 4 digit display. For example a thermometer can be made using on board LM35 sensor. 7 Seven segment multiplexed display is a tiny board and has been […]
PCB Prototyping Is Much Easier Than Before With This PCB Printer
https://www.electronics-lab.com/pcb-prototyping-much-easier-pcb-printer/
3D printers and other prototyping tools are making it easier and simpler to build prototypes and test ideas. Building circuit boards is fun but difficult. While you could do it at home with some etchant and some clear plastic, PCB printer hopes to make the entire process much faster and easier. The success of these […]
2 Channel Relay Shield for Arduino Nano
https://www.electronics-lab.com/2-channel-relay-shield-arduino-nano/
2 Channel Mini easy to use Relay shield for Arduino Nano consists of ULN2003 IC and 2 Mini 12V Relays with NO/NC contacts of 2A-24V Load Capacity. ULN2003 used as Relay coil driver. Relay can be controlled from D3 and D4 of Arduino Nano. Three pin Header Connector CN1 and CN2 provided to connect the […]
2 Channel Relay Shield for Arduino Nano
https://www.electronics-lab.com/project/2-channel-relay-shield-arduino-nano/
2 Channel Mini easy to use Relay shield for Arduino Nano consists of ULN2003 IC and 2 Mini 12V Relays with NO/NC contacts of 2A-24V Load Capacity. ULN2003 used as Relay coil driver. Relay can be controlled from D3 and D4 of Arduino Nano. Three-pin Header Connector CN1 and CN2 provided to connect the Load. […]
Introducing the Arduino MKR WAN 1300 and MKR GSM 1400
https://www.electronics-lab.com/introducing-arduino-mkr-wan-1300-mkr-gsm-1400/
Arduino has introduced a pair of new IoT boards with embedded LoRa and GSM capabilities. The Arduino MKR WAN 1300 and MKR GSM 1400 are designed to offer a practical and cost-effective solution for developers, makers and enterprises, enabling them to quickly add connectivity to their projects and ease the development of battery-powered IoT edge applications. Both […]
IkaScope: a wireless oscilloscope probe
https://www.electronics-lab.com/wireless-oscilloscope-probe-pocket/
Author: Maurizio Di Paolo Emilio IkaScope is a wireless oscilloscope probe that allows to observe the change of electrical signals over time. The probe is a handheld device, portable and fits perfectly in the hand and pocket. By using high-speed Wi-Fi connection, IkaScope wireless oscilloscope probe communicates with laptop, tablet or smartphone to share the […]
Researchers Develop Long Range Backscatter Sensors That Consume Almost No Power
https://www.electronics-lab.com/university-washington-develops-long-range-backscatter-sensors-consumes-almost-no-power/
Researchers at the University of Washington developed a new backscatter sensors that can operate over long ranges with very little power. The researchers demonstrated for the first time that the device runs on almost zero power and can transmit data across distances of up to 2.8 kilometers. Backscatter communication works by emitting a radio signal and […]
2.9″ ESPaper Lite Kit for $39.90
https://www.electronics-lab.com/2-9%e2%80%b3-espaper-lite-kit-39-90/
The 2.9″ ESPaper Lite Kit contains most of the parts you need to display data over wifi: With the 2.9″ ESPaper module you can display data retrieved over WiFi on an ePaper with little effort. The integrated ESP8266 Wroom-02 module updates the 296×128 B&W ePaper display over the SPI bus. The module also features a […]