5 Amp H-Bridge DC Motor Driver using MC33886
https://www.electronics-lab.com/5-amp-h-bridge-dc-motor-driver-using-mc33886/
This tiny module has been designed to use in Robotics, Power tools, automotive applications. The module based on MC33886 from NXP, MC33886 is a monolithic power IC comprising control logic, charge pump, gate drive, and low RDS(ON)MOSFET output H-Bridge circuitry in a small surface mount package. MC33886 is a monolithic h-Bridge ideal for fractional horsepower […]
DIY Arduino RGB LED Controller Shield
https://www.electronics-lab.com/diy-arduino-rgb-led-controller-shield/
One of our visitors tipped us with his latest project, an Arduino RGB LED controller using low Rds-on MOSFETS, designed in Solo-PCB. This Arduino shield is designed to drive RGB (Red Green Blue) LED strips by using PWM (Pulse Width Modulation) method. It can brighten up and down each color independently by changing the duty […]
5 Amp H-Bridge DC Motor Driver using MC33886
https://www.electronics-lab.com/project/5-amp-h-bridge-dc-motor-driver-using-mc33886/
This tiny module has been designed to be used in Robotics, Power tools, automotive applications etc. The module is based on MC33886 from NXP. The MC33886 is a monolithic power IC comprising control logic, charge pump, gate drive, and low RDS(ON)MOSFET, H-Bridge output circuitry in a small surface-mount package. MC33886 is a monolithic H-Bridge ideal […]
DIY Voltmeter using a simple voltage sensor and Arduino Uno and a Nokia 5110 LCD
https://www.electronics-lab.com/diy-voltmeter-using-simple-voltage-sensor-arduino-uno-nokia-5110-lcd/
In this video we are going to learn how to build our own voltmeter using a very inexpensive sensor. The voltage we measure is then displayed in a Nokia 5110 LCD display. This project is very easy to build and great learning experience. With this project we can measure the voltage of our voltage sources, […]
Fluke 279 FC Thermal Multimeter Review
https://www.electronics-lab.com/fluke-279-fc-thermal-multimeter-review/
Fluke 279 FC True-rms Thermal Multimeter helps you find, repair, validate, and report many electrical issues quickly so that you are confident problems are solved. Fluke 279 FC Thermal Multimeter Review – [Link]
5V TO -12V Inverting Switching Regulator
https://www.electronics-lab.com/5v-12v-inverting-switching-regulator/
The DC/DC inverting switching regulators project is specifically designed to invert input voltages to negative outputs. It offer input voltage ranges from 4.5V to 6V and output -12V 100mA The MC34063A IC is heart of the project from On semiconductor. The MC33063A is a monolithic control circuit containing the primary functions required for DC-DC converters, […]
42V, 3.5A-out buck regulator operates at 175°C ambient
https://www.electronics-lab.com/42v-3-5a-buck-regulator-operates-175c-ambient/
LT8610AX is a 3.5A, 42V input-capable synchronous step-down switching regulator, which operates in ambient temperatures up to 175°C. Synchronous rectification delivers efficiency as high as 95% while Burst Mode operation keeps quiescent current under 3.5 µA in no-load standby conditions. The device’s 3.7V to 42V input voltage range is suitable for high temperature applications such […]
LED current regulator has low dropout
https://www.electronics-lab.com/led-current-regulator-low-dropout/
Peter Demchenko @ edn.com This Design Idea circuit regulates the current through one or more LEDs, making it almost independent of supply voltage. Its main advantage is a very small dropout voltage, which can be less than 100mV. The design could find use on LED strips, where the voltage can vary along the length due […]
5V to -12V Inverting Switching Regulator
https://www.electronics-lab.com/project/5v-12v-inverting-switching-regulator/
The DC/DC inverting switching regulators project is specifically designed to invert input voltages to negative outputs. It offer input voltage ranges from 4.5V to 6V and output -12V 100mA The MC34063A IC is heart of the project from On semiconductor. The MC33063A is a monolithic control circuit containing the primary functions required for DC-DC converters, […]
Use a Fingerprint sensor module to add biometric security to your Arduino projects
https://www.electronics-lab.com/use-fingerprint-sensor-module-add-biometric-security-arduino-projects/
educ8s.tv has a new video on how to use a fingertip sensor with Arduino. If you want to add biometric security features to your Arduino projects, an easy way to do so, is to add a fingerprint sensor module to it. In this video we demonstrate how easy to use a fingerprint sensor with an […]