PCBWay added more solder mask colors and includes a new transparent design
https://www.electronics-lab.com/pcbway-added-more-solder-mask-colors-and-includes-a-new-transparent-design/
Some of the well-known PCB layout design software are Eagle Software, Altium Designer 22 and KiCAD. However, Altium Designer 22 remains a market leader despite its expensive full-suite license. For embedded electronic manufacturers inclined towards adopting open-source technologies, choose KiCAD as a PCB design tool that recently announced the release of KiCAD version 6.0.0 that […]
AAEON Announces BOXER-8260AI and BOXER-8261 AI@Edge Embedded BOX PCs Powered by NVIDIA Jetson AGX Orin System on Modules
https://www.electronics-lab.com/aaeon-announces-boxer-8260ai-and-boxer-8261-aiedge-embedded-box-pcs-powered-by-nvidia-jetson-agx-orin-system-on-modules/
With the announcement of the NVIDIA® Jetson AGX Orin™ developer kit, AAEON is excited to utilize the many benefits that such a powerful system-on-module (SOM) can bring to its own product lines. With the same form factor and pin compatibility as the NVIDIA Jetson AGX Xavier™, but with an improvement from 32 TOPS to 275 […]
Autonomous USB Type-C Power Delivery for sink applications
https://www.electronics-lab.com/autonomous-usb-type-c-power-delivery-for-sink-applications/
ROHM’s USB Type-C power delivery provides for quick and easy design and implementation of USB Type-C PD for sink applications (UFP) ROHM’s ICs are members of their proven full-featured USB Type-C power delivery (PD) controller portfolio. They allow quick and easy design and implementation of USB Type-C PD for sink applications (UFP). Supporting the full […]
Rohde & Schwarz at DesignCon 2022 presents latest innovations for high-speed digital applications
https://www.electronics-lab.com/rohde-schwarz-at-designcon-2022-presents-latest-innovations-for-high-speed-digital-applications/
At DesignCon 2022, Rohde & Schwarz will showcase live demos covering industry trends in cooperation with industry experts such as Samtec, ataitec, Clear Signal Solutions, and more. At DesignCon Rohde & Schwarz is demonstrating a mix of unique solutions for high-speed digital applications. High-speed digital interfaces are at the core of all electronic designs. Increasing […]
1200V High-Current Half-Bridge using FAN73912
https://www.electronics-lab.com/1200v-high-current-half-bridge-using-fan73912/
The project presented here is designed for high-voltage and high-speed driving for MOSFETS and IGBTs that operate up to +1200V. The project consists of a FAN73912 gate driver chip and 2 x IGBTs, DC bus capacitors, current sense resistor for current feedback etc. The advanced input filter of HIN provides protection against short-pulsed input signals […]
High Current Half-Bridge with Over Current & Voltage Feedback for Step Down DC-DC Converter
https://www.electronics-lab.com/high-current-half-bridge-with-over-current-voltage-feedback-for-step-down-dc-dc-converter/
This project enables the user to create a high current DC-DC converter. The project consists of a high current inductor, high current low voltage 2 x MOSFETs, half-bridge driver LT1158 chip, voltage feedback using onboard R9 and R10 resistor dividers, shunt resistor for overcurrent shut-down. The project has all the required components to create a […]
Panasonic AQY4C PhotoMOS PCB Mount Solid State Relays
https://www.electronics-lab.com/panasonic-aqy4c-photomos-pcb-mount-solid-state-relays/
Panasonic AQY4C PhotoMOS PCB Mount Solid State Relays are CC-type, normally closed, ultra-miniature, TSON packaged (1.95mm x 1.80mm x 0.8mm) relays using capacitive isolation technology. These relays are approximately 88% smaller than the previous SOP-packaged devices, offering a 3.5mm2 mounting area. Low current consumption and a 0.2mA maximum input current contribute to energy savings and […]
Texas Instruments TPS258x-Q1 Integrated USB Charging Port Solution
https://www.electronics-lab.com/texas-instruments-tps258x-q1-integrated-usb-charging-port-solution/
Texas Instruments TPS258x-Q1 Integrated USB Charging Port Solution integrates a monolithic, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It also includes two USB current-limit switches with charging port auto-detection. The TPS2585x-Q1 offers a compact solution that achieves 6.6A of continuous output current with excellent load and line regulation over a wide input supply […]
SB Component Ltd Unveils UHF HAT for Raspberry Pi with a 1.14-inch LCD Display
https://www.electronics-lab.com/sb-component-ltd-unveils-uhf-hat-for-raspberry-pi-with-a-1-14-inch-lcd-display/
This isn’t the first time UK-based embedded electronic design and manufacturer, SB Components Ltd has released an RFID HAT for Raspberry Pi. The electronic device supplier has launched a crowdfunding campaign on Kickstarter with a goal of £10,000 for its newly designed 40-pin ultra-high frequency (UHF) HAT for Raspberry Pi. Even though the goal has […]
M5Stamp C3U IoT Module Incorporates RISC-V-based ESP32-C3 Microcontroller
https://www.electronics-lab.com/m5stamp-c3u-iot-module-incorporates-risc-v-based-esp32-c3-microcontroller/
Chinese electronic device manufacturer M5Stack unveiled a RISC-V powered M5Stamp C3U IoT module with advanced wireless connectivity for home and industrial automation. For the implementation of IoT projects that are subject to operate at higher temperatures of up to 230℃, the M5Stamp C3U IoT module is shipped inside a heat-resistant plastic enclosure. At the heart […]