434Mhz Wireless Receiver – LED Dimmer – Arduino Compatible

434Mhz Wireless Receiver – LED Dimmer – Arduino Compatible

The Wireless Receiver Dimmer is a complementary component to the Wireless Potentiometer Transmitter, designed to receive and process data transmitted from the transmitter. This project can be used to drive the LED, Heater or brushed dc motor, and supports inductive or resistive loads....

Continue Reading
1.101
Views
0 Comments
434MHz Wireless LED Dimmer Transmitter – Arduino Compatible

434MHz Wireless LED Dimmer Transmitter – Arduino Compatible

The project presented here is a 434MHz Wireless Transmitter for LED Dimmer, built around the ATMEGA328 Arduino microcontroller. The potentiometer is connected to the ADC A1 analog pin of the ATMEGA328 chip. The microcontroller reads the analog value of the potentiometer and transmits...

Continue Reading
1.070
Views
0 Comments
LED Dimmer for Super High Brightness LEDs

LED Dimmer for Super High Brightness LEDs

This is a high-efficiency and reliability DC/DC converter with a dimming feature for super high brightness LEDs.  The project is built using L6902D chip. L6902 is a complete and simple step-down switching regulator with adjustable current limit. The current control loop with external...

Continue Reading
1.310
Views
0 Comments
Low-Cost LED Dimmer using LM3578

Low-Cost LED Dimmer using LM3578

This Low-cost LED dimer project includes two main parts, an LM3578 chip, and a MOSFET. The LM3578 generates a PWM signal, and Q1 MOSFET helps to drive a high current LED. The project also includes current limit feature. Over current trigger point is set to 1.1A. LED intensity can be...

Continue Reading
1.329
Views
0 Comments
Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible

Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible

This is an easy-to-make LED dimmer using RF remote control. The project is capable of driving a load up to 24W (2A X 12V LED). Any 12V single or 12V LED strip can be used. This is an open-source Arduino compatible hardware that has Atmega328 microcontroller, Potentiometer, MOSFET, 5V...

Continue Reading
2.029
Views
0 Comments
12W Constant-Current LED Driver with PWM Dimming – 12V DC@1A Input

12W Constant-Current LED Driver with PWM Dimming – 12V DC@1A Input

This is a high-performance, adjustable constant current, and PWM dimmer project. It provides accurate output constant current and PWM control. The circuit regulates the current flowing through a LED/LED array to maintain the desired level of light output.  The board consists of...

Continue Reading
2.825
Views
0 Comments
60W LED Dimmer for 12V LEDs using 555 Timer

60W LED Dimmer for 12V LEDs using 555 Timer

The project shown here is a cheap 60W LED dimmer for 12V LEDs/12V LED strips. The circuit is based on the very popular, versatile, and low-cost 555 timer IC, NE555 IC generates a PWM signal and IRF540 MOSFET works as output driver for the LEDs. In this circuit the 555 IC used in an...

Continue Reading
4.796
Views
0 Comments
12W Dimmer with Soft Start for 12V LEDs

12W Dimmer with Soft Start for 12V LEDs

The circuit presented here is a LED dimmer with a soft-start function. The board can drive a LED up to 12W and the circuit can manage a load up to 1A continuous with 12Vsupply. The circuit is built using SG3525 PWM IC and the IRFR120 MOSFET, SG3525 generates the PWM, and IRFR120...

Continue Reading
5.299
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives