Development board for Brushless Motor, DC Brushed Motor, AC Motors (Pre-Driver)

Development board for Brushless Motor, DC Brushed Motor, AC Motors (Pre-Driver)

The project described here is a pre-driver for brushless motors with a hall sensor. The board incorporates many features like current monitor, fault, speed control, direction control motor start/stop using tactile switches, various function LEDs, 6 PWM LEDs. By combining it with a...

Continue Reading
1.789
Views
0 Comments
600W – 230VAC – High Voltage DC Motor Speed Controller – Heater Controller – Lamp/LED Dimmer

600W – 230VAC – High Voltage DC Motor Speed Controller – Heater Controller – Lamp/LED Dimmer

This is a very powerful DC Motor speed controller for DC motors up to 330V DC and current up to 2A. Basically, the project is a high voltage PWM source with adjustable frequency and adjustable PWM duty cycle range 0 to 99%.  The board has been designed considering many applications...

Continue Reading
2.212
Views
0 Comments
600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)

600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)

This compact IPM module circuit provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. The circuit is based on FNA23060 chip which integrates the optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also...

Continue Reading
2.276
Views
0 Comments
High Voltage DC Power Supply for Intelligent Power Modules

High Voltage DC Power Supply for Intelligent Power Modules

Although this power supply design is specific to the Intelligent Power Modules (IPM), the concepts and circuit design may be used for any power supply that requires high voltage output up to 400V DC and 6 A. It is an unregulated power supply, DC output is dependent on AC input.  The...

Continue Reading
2.030
Views
0 Comments
10A 400V DC Intelligent Power Module (IPM)

10A 400V DC Intelligent Power Module (IPM)

This 10A -400V DC Intelligent power module board has been designed using ON Semiconductors STK544UC62K. This Inverter IPM module includes the output stage of a 3-phase inverter, pre-drive circuits, bootstrap circuits, protection circuits, op-amp based current sense circuit, comparator...

Continue Reading
17.853
Views
11 Comments
Archives