High-performance, High-reliability Bipolar Stepper Motor Driver

High-performance, High-reliability Bipolar Stepper Motor Driver

The project presented here is a bipolar stepper motor driver. It is based on BD63731EFV chip which is a low-consumption driver that is driven by a PWM signal. The power supply voltage of the project is 8 to 28V DC, and the rated output current is 3A. CLK-IN driving mode is adopted for...

Continue Reading
1.040
Views
0 Comments
3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver

3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver

Driving a low current 3 phase brushless Sensorless DC motor is very easy with this project. This Full-wave BLDC driver project is capable to drive low current brushless fan motor without a hall sensor. 180° sinusoidal drive, high torque output, and silent drive are a few key features...

Continue Reading
1.081
Views
1 Comments
PWM Temperature Controlled FAN using TC648 and NTC sensor

PWM Temperature Controlled FAN using TC648 and NTC sensor

The project described here is a switch mode fan speed controller for use with brushed or brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation (PWM). 10K Ohms NTC is used to sense the temperature. The project is built using TC648 chip...

Continue Reading
1.192
Views
0 Comments
DC Motor Controller using Relay and MOSFET – Arduino Interface

DC Motor Controller using Relay and MOSFET – Arduino Interface

The project presented here is a low-cost solution to control high power brushed DC motor speed and direction. Traditional DC motor controllers are based on solid-state circuitry known as H-Bridge. Here we have made an H-bridge configuration using high current 2 x relays which can...

Continue Reading
1.156
Views
0 Comments
Low-Cost DC Motor Direction Controller with Fast Brake using 2 Relays

Low-Cost DC Motor Direction Controller with Fast Brake using 2 Relays

The project presented here is a low-cost easy to use DC brushed motor direction controller with fast-brake, the project was built using two 12V Relays, 2 x BJT transistors, and 2 x tactile switches. The two LEDs are provided to display the motor direction, 2 tactile switch controls...

Continue Reading
1.093
Views
0 Comments
BLDC Motor and DC Brushed Motor Driver 

BLDC Motor and DC Brushed Motor Driver 

This BLDC motor driver board is equipped with a smart IFX007T half-bridge. The BLDC motor control project is capable to drive one BLDC motor. Alternatively, it can be used to drive one or two bi-directional DC motors (H-Bridge configuration, cascaded to support the second motor) or up...

Continue Reading
1.213
Views
0 Comments
Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible

Brushed DC Motor Controller Using Rotary Encoder – Arduino Compatible

This DC Motor controller provides direction and speed control of brushed DC Motor using Rotary Encoder. This is Arduino compatible hardware that consists of LMD18201 DC motor driver chip, Atmega328 microcontroller, Rotary Encoder, L317 regulator, and other components.  Hardware...

Continue Reading
1.136
Views
0 Comments
2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible

2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible

This is an Arduino compatible board that contains an Atmega328 microcontroller and Bipolar Stepper Motor Driver chip STK682-010. This Hybrid IC from ON Semiconductor can deliver up to 2.5A current and it can have an input supply up to 32V DC. It has multiple micro-stepping options...

Continue Reading
1.133
Views
0 Comments
Archives