3 Phase IPM Module for Small Power AC Motor
https://www.electronics-lab.com/project/3-phase-ipm-module-for-small-power-ac-motor/
This is a 3-Phase Inverter Driver project designed for Small Power AC Motors. The project is built using FSB50550AT IPM chip. This compact and reliable inverter project is ideal for small power motors such as fans and pumps. An H-bridge configuration can also be created for low current high-voltage brushed DC motors. The Inverter board […]
3 Phase Inverter for Low Power AC Motor
https://www.electronics-lab.com/project/3-phase-inverter-for-low-power-ac-motor/
This is a 3-Phase Inverter Driver project designed for Low Power AC Motor. The FSB50450AS chip is the heart of the project. A compact inverter project is ideal for small power motors such as fans and pumps. An H-bridge configuration can also be created for low-current high-voltage brushed DC motors. The Inverter project supports loads […]
Robotics Arm Controller using PS3 Wireless Remote
https://www.electronics-lab.com/project/robotics-arm-controller-using-ps3-wireless-remote/
This project enables the user to control an RC servo-based robotics arm wirelessly. The board is based on ESP32-WROOM 32E Bluetooth/Wi-Fi module, thus PS3 or PS4 wireless remote can be paired. The project is built using ESP32 chip with Bluetooth and Wi-Fi connectivity, 4 potentiometers connected to analog pins, 8 x 3 pin header connectors […]
Bluetooth Robot Car Controller using ESP32
https://www.electronics-lab.com/project/bluetooth-robot-car-controller-using-esp32/
This wireless robot car controller board is built using an ESP32 BT/Wi-Fi module, 2 x H-Bridges, 3.3V regulator. It also includes an ESP32 programming connector, power LED, screw terminal connector for the power supply, header connector for motors, and high-value capacitors on the DC supply for smooth motor operations. The operating power supply is 8V […]
H-Bridge for High Power Brushed DC Motor with Current Sense
https://www.electronics-lab.com/project/h-bridge-for-high-power-brushed-dc-motor-with-current-sense/
This H-bridge board is an easy-to-use brushed DC motor driver that can handle large-size motors such as wheelchair motors, and winch motors. An H-bridge is an electronic circuit that switches the polarity of a voltage applied to a load. The circuit is built using 4 x N-Channel MOSFETs, gate driver IR2104, and a logic circuit. […]
Position and Speed Controller for DC Motor with Incremental Encoder
https://www.electronics-lab.com/project/position-and-speed-controller-for-dc-motor-with-incremental-encoder/
This project consists of Arduino Arduino-compatible microcontroller ATmega328, an L298 Motor driver, a Joystick, a programming connector, an Infrared sensor, and various analog and digital I/O pins. The project is Arduino compatible and can be programmed using Arduino IDE and many motor-related projects can be developed using this hardware. L298 has two H-bridges but here […]
16 Channel RC Servo Driver with I2C Interface
https://www.electronics-lab.com/project/16-channel-rc-servo-driver-with-i2c-interface/
This is a 16-channel servo driver that can drive 16 x RC servos over I2C interface. The project is built using PCA9685 chip, a 16-channel PWM generator that can drive 16-channel servos simultaneously. The board can be connected to Arduino or another microcontroller. Driving robots, and animatronics puppets is easy with this board. The board […]
3 Phase Brushless Motor Driver using L6235
https://www.electronics-lab.com/project/3-phase-brushless-motor-driver-using-l6235/
The project presented here is a 3-phase Brushless motor driver. The project consists of an L6235 device which is DMOS fully integrated 3-phase motor driver with overcurrent protection. Manufactured in BCD technology, the device combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. The device includes all the circuitry needed […]
DC Motor Control Using Joystick
https://www.electronics-lab.com/project/dc-motor-control-using-joystick/
This is a compact, low-profile, and high-performance DC motor driver that provides easy control of a DC motor using a joystick. This small-size board can drive small to medium-sized brushed DC motors with up to 2.5A continuous and 6A peak currents. It is an Arduino-compatible project that helps users develop their own code and drive […]
Joystick Stepper Motor Controller
https://www.electronics-lab.com/project/joystick-stepper-motor-controller/
This is a pulse generator for a stepper motor driver using a joystick. It is a board that contains an Arduino-compatible microcontroller and circuitry for controlling up to 2-channel (2-axis) stepper motors. The board has multiple options to develop stepper motor-related control systems, from a 2-axis analog joystick to a trimmer potentiometer to a 7-channel […]