Signal Conditioner for Sensorless BLDC Operations
https://www.electronics-lab.com/project/signal-conditioner-for-sensorless-bldc-operations/
This is a back EMF signal conditioning circuit that can be used to develop high-voltage sensorless motor drivers. When a sensorless algorithm is used to control the BLDC motor speed, the Back EMF (BEMF) signals are used. Based on zero crossing of BEMF signals, motor commutation is decided in the firmware. The signal conditioning circuit […]
Closed Loop Analog Position Control using Brushed DC Motor and Potentiometer
https://www.electronics-lab.com/project/closed-loop-analog-position-control-using-brushed-dc-motor-and-potentiometer/
The project presented here is a low-cost position control closed-loop analog-servo using brushed DC motor and potentiometer as feedback. This project provides all necessary active functions for a closed-loop servo system using a Brushed DC Motor and potentiometer mounted on the output shaft of the DC Motor with Gear. The project is ideally suited for […]
IR Remote Controlled Motorized Potentiometer – Arduino Compatible
https://www.electronics-lab.com/project/ir-remote-controlled-motorized-potentiometer-arduino-compatible/
This is an Infrared Remote controlled motorized potentiometer controller. It’s an open-source project built on the Arduino platform and compatible with Arduino IDE for custom programming. The project consists ATMEGA328 microcontroller, IR sensor, L293D motor driver, ALPS Motorized potentiometer, a connector for Arduino programming, etc. The L293D H-bridge drives the potentiometer motor, 2 Parallel direction […]
DC Motor Speed, Direction and Brake Control with NRF24L01 RF Module – Arduino Compatible
https://www.electronics-lab.com/project/dc-motor-speed-direction-and-brake-control-with-nrf24l01-rf-module-arduino-compatible/
This is Arduino compatible hardware that can control a single DC motor speed, direction, and brake using an RF remote control. The project is based on an ATMEGA328 microcontroller, H-Bridge DC motor driver chip LM18201, NRF24L01 RF module, 5V Regulator, 3.3V regulator and other components. This board can drive a DC Motor up to 24V […]
Single Joystick Remote Control Transmitter using NRF24L01 – Arduino Compatible
https://www.electronics-lab.com/project/single-joystick-remote-control-transmitter-using-nrf24l01-arduino-compatible/
This is an Arduino compatible open-source hardware that includes 1 x joystick, NRF24L01 RF module, Atmega328D microcontroller, 3.3V regulator, power LED, function LED, and other required components. This board can be used for the development of various applications such as Gaming, Remote RC servo driver, RC Motor controller, Robotics, and many more. Arduino Code is […]
Dual Joystick RF Remote Transmitter with NRF24L01 RF module – 2 Joystick Control
https://www.electronics-lab.com/project/dual-joystick-rf-remote-transmitter-with-nrf24l01-rf-module-2-joystick-control/
This is an Arduino compatible open-source hardware that includes 2 x Joysticks, NRF24L01 RF module, Atmega328 microcontroller, 3.3V regulator, power LED, function LED, Arduino programming connector, and other required components. This board can be used for the development of various applications such as Gaming, Remote RC servo driver, Robotics, and many more. Connector CN3 was […]
8 Channel RC Servo Driver Over RF Link using NRF24L01 RF Module – Arduino Compatible
https://www.electronics-lab.com/project/8-channel-rc-servo-driver-over-rf-link-using-nrf24l01-rf-module-arduino-compatible/
This is an easy-to-build open-source Arduino compatible board that enables driving 8 RC servos over NRF24L01 RF Link. The project can be used as a standalone RC servo driver or 8 channel RF remote-controlled RC servo Receiver. An optional OLED display option can be used to develop RC signal monitor. The tiny module contains an […]
Development board for Brushless Motor, DC Brushed Motor, AC Motors (Pre-Driver)
https://www.electronics-lab.com/project/development-board-for-brushless-motor-dc-brushed-motor-ac-motors-pre-driver/
The project described here is a pre-driver for brushless motors with a hall sensor. The board incorporates many features like current monitor, fault, speed control, direction control motor start/stop using tactile switches, various function LEDs, 6 PWM LEDs. By combining it with a hybrid IC or IPM module large size high voltage and high current […]
600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)
https://www.electronics-lab.com/project/600v-30a-ipm-module-carrier-board-for-variable-frequency-drive-vfd/
This compact IPM module circuit provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. The circuit is based on FNA23060 chip which integrates the optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and […]
Joystick Controlled 2 x RC Servo motors – Arduino Compatible
https://www.electronics-lab.com/project/joystick-controlled-2-x-rc-servo-motors-arduino-compatible/
This project enables easy control of 2 RC servo motors using a thumb joystick. This is an Arduino compatible project and it consists of a thumb joystick, ATMEGA328 microcontroller, filter capacitor on dc supply, and other components. The thumb joystick has 2 axes, X and Y. The joystick consists of 2 x 10K potentiometers. These […]