3V to 5V DC Output Step-Up DC-DC Converter using MAX668
https://www.electronics-lab.com/project/3v-to-5v-dc-output-step-up-dc-dc-converter-using-max668/
The project presented here is a powerful constant-frequency, pulse-width modulating (PWM), current-mode step-up DC-DC switching regulator efficiently producing 5V from input voltages between 3V to 5V. The project can be used in a portable device that works with a battery. The module produces a peak current of up to 1A and an output voltage of […]
DC-HV DC Converter – 200V @ 20mA Output with 12V DC Input
https://www.electronics-lab.com/project/dc-hv-dc-converter-200v-20ma-output-with-12v-dc-input/
This is a low-cost DC-HV DC converter built using TL3843 Low-Power Current-Mode PWM Controller from TI. Screw terminal connectors are provided for input and output, onboard LED D1 indicates the input supply. The project provides 200V DC @ 20mA output from 12V DC supply input. Features Operating Power Supply 12V DC @ 1A (Range 10V […]
Phase-Shifted Full-Bridge PWM Controller Module – LM5046 Breakout Board
https://www.electronics-lab.com/project/phase-shifted-full-bridge-pwm-controller-module-lm5046-breakout-board/
This is a Phase-Shifted Full-Bridge PWM LM5046 carrier board that contains all of the features necessary to implement a phase-shifted full-bridge topology power converter. All inputs and outputs pins are accessible using the header connector. High efficiency DC-DC converter can be created using LM5046 carrier board + External H-Bridge and Transformer. Refer to the datasheet […]
65V Input to 12Vdc Output – 1A synchronous buck DC/DC converter using LM5164
https://www.electronics-lab.com/project/65v-input-12vdc-output-1a-synchronous-buck-dc-dc-converter-using-lm5164/
This is a step-down DC-DC converter mainly designed for application such as high-cell-count battery packs, power tools, garden tools and electric scooters, drones. Some of the features of the project is precision enable, input voltage UVLO, internal soft start etc. The project operates over wide input voltage range of 15V to 65V to provide a […]
24V to 48V @ 1.5A Step-Up DC-DC Converter using LM2588
https://www.electronics-lab.com/project/24v-48v-1-5a-step-dc-dc-converter-using-lm2588/
This is another boost DC-DC Converter that provides 48V DC output from 24V DC input with a load current of up to 1.5A. The board is very small. Booster is based on LM2588 IC from Texas Instruments. The LM2588 regulator integrated circuit is specifically designed for fly-back, step-up (Boost), and forward converter. Board has minimum […]