Projects Projects
Bootloader Programmer Tool for ATMEGA328 32Pin TQFP Arduinio ISP
If you have a new ATmega328P you’ll need to burn the bootloader, to be able to upload a sketch with Arduino IDE.
Boost Converter – Input 3.3V, Output 5V@500mA
The project presented here is a compact, high-efficiency, low-cost, and low-EMI step-up DC/DC module designed to replace LDO regulators.
Fuel Gauge with OLED Display
This project enables the measurement of fuel levels in a tank using a resistive float sensor.
Bluetooth Smart LED Dimmer – 4 Channel Bluetooth ON/OFF Switch
This Bluetooth Smart LED Dimmer, 4 Channel ON/OFF Switch is a versatile device that enables users to control various devices, including lights, fans, and DC motors, using a Bluetooth app on an Android device.
Arduino Bluetooth Relay Switch
This Bluetooth Relay Switch enables users to control lights, fans, or other devices using a Bluetooth app on an Android device.
Arduino 8 Channels High-Side Switch
The project presented here is a high-side switch (8 channels) with MOSFET output.
AMR Angle Sensor and Signal Conditioner Module
This angle sensor module features an ADA4571 chip, an anisotropic magneto resistive (AMR) sensor with integrated signal conditioning amplifiers and ADC drivers.
10 Minutes Timer for AC Loads
The project described here is a 10-minute timer using an Arduino microcontroller, capable of driving AC loads up to 30A.
±340V DC Output, 15V DC Input, Isolated Flyback Converter
The project presented here is an isolated flyback converter featuring the LT3748 chip from Analog Devices.
High Current/High Voltage OPAMP with Boost Output Current Greater Than 1A
This project provides High Voltage and High Current output swing.
Voltage Controlled Amplifier with Balanced Input
The project presented here is a Voltage Controlled Amplifier (VCA).
Fuel Level Monitor with 15 Segments Bar-Graph Display
This Fuel level Monitor allows users to measure the fuel level using a resistive float sensor in the fuel tank.