Projects Projects

Two Channel Current Sensor for High Voltage Range

Two Channel Current Sensor for High Voltage Range

This board is built using a 2 x INA149 precision unity-gain difference amplifier with a very high input common-mode voltage range.


0 comments Tested
Dual Channel Voltage-to-Current (V-I) converter circuit with BJT

Dual Channel Voltage-to-Current (V-I) converter circuit with BJT

This low-side voltage-to-current (V-I) converter delivers a well-regulated current to a load.


0 comments Tested
Isolated Flyback Converter with 18V-28V Input and 12V Output

Isolated Flyback Converter with 18V-28V Input and 12V Output

The project presented here is a micropower no-opto isolated flyback converter featuring the LT8304 chip from Analog Devices.


0 comments Tested
Inclinometer with 17 Segment BarGraph Display

Inclinometer with 17 Segment BarGraph Display

This project is an inclinometer based on the ADXL203/ADXL103 accelerometer chip and the Arduino microcontroller ATMEGA328.


0 comments Tested
Bootloader Programmer Tool for ATMEGA328 32Pin TQFP Arduinio ISP

Bootloader Programmer Tool for ATMEGA328 32Pin TQFP Arduinio ISP

If you have a new ATmega328P you’ll need to burn the bootloader, to be able to upload a sketch with Arduino IDE.


1 comment Tested
Boost Converter – Input 3.3V, Output 5V@500mA

Boost Converter – Input 3.3V, Output 5V@500mA

The project presented here is a compact, high-efficiency, low-cost, and low-EMI step-up DC/DC module designed to replace LDO regulators.


0 comments Tested
Fuel Gauge with OLED Display

Fuel Gauge with OLED Display

This project enables the measurement of fuel levels in a tank using a resistive float sensor.


1 comment Tested
Bluetooth Smart LED Dimmer – 4 Channel Bluetooth ON/OFF Switch

Bluetooth Smart LED Dimmer – 4 Channel Bluetooth ON/OFF Switch

This Bluetooth Smart LED Dimmer, 4 Channel ON/OFF Switch is a versatile device that enables users to control various devices, including lights, fans, and DC motors, using a Bluetooth app on an Android device.


0 comments Tested
Arduino Bluetooth Relay Switch

Arduino Bluetooth Relay Switch

This Bluetooth Relay Switch enables users to control lights, fans, or other devices using a Bluetooth app on an Android device.


0 comments Tested
Arduino 8 Channels High-Side Switch

Arduino 8 Channels High-Side Switch

The project presented here is a high-side switch (8 channels) with MOSFET output.


1 comment Tested
AMR Angle Sensor and Signal Conditioner Module

AMR Angle Sensor and Signal Conditioner Module

This angle sensor module features an ADA4571 chip, an anisotropic magneto resistive (AMR) sensor with integrated signal conditioning amplifiers and ADC drivers.


0 comments Tested
10 Minutes Timer for AC Loads

10 Minutes Timer for AC Loads

The project described here is a 10-minute timer using an Arduino microcontroller, capable of driving AC loads up to 30A.


0 comments Tested