Test - Measurement Projects
0-20V Bargraph Voltmeter
0 – 20V LED Voltmeter kit displays the voltage of the source using 20 LED’s.
Geiger counter with SBM20 tube
I “rebuild” my Geiger counter, the SBM-20 tube was initially inside the box, so, i have put this one inside a 32mm diam plastic tube, for more convenience, wired through a XLR3 cable.
12V Lead Acid Battery Voltage Monitor
This project is a 12V Lead Acid Battery Voltage Monitor Description 12V Lead Acid Battery Monitor is a simple project which tells you the voltage of your Lead acid battery visually with the help of 10 LED’s.
0-10V Voltage Monitor
This project is a 0-10V Voltage Monitor.
Variable Range LED Voltmeter
This project is a Variable Range LED voltmeter.
Tiny DDS – Open source DDS generator
This project is an open source (hardware & software) DDS generator, based on: smart TFT module, AD9834, LM7171 fast amplifier.
NiCad-NiMh Battery Monitor
This project is a NiCad-NiMh Battery Monitor based on LM3914 IC Description The simple project can be used as test gear.
Advanced LC meter
This project is an advanced LCR meter based on PIC16F690 microcontroller.
Simple LC meter
This project is a simple LC meter based on PIC16F682A mcu.
Thermocouple Type-K amplifier
This project is a simple Thermocouple K-type amplifier based on AD595 IC.
Simple SMD LED tester
This project is a simple LED tester and LED polarity checker.
TraId – Transistor Type & Polarity Identifier
TraId is a simple transistor tester and pinout identifier.