Arduino FM Radio Receiver with TEA5767 and a Nokia 5110 LCD display
https://www.electronics-lab.com/arduino-fm-radio-receiver-tea5767-nokia-5110-lcd-display/
FM radio transmitters and receivers are one of the projects that fascinated a lot of people and drove them to become makers. The lure of being able to deploy your own radio station, or build your own surveillance(-like) devices was what encouraged most of us to build our first fm transmitter or receiver. Nowadays, microcontrollers […]
InfraRed Robot Controller Shield For Arduino Nano
https://www.electronics-lab.com/infrared-robot-controller-shield-arduino-nano/
This compact Infrared robot controller is based on Arduino Nano and L298 H-Bridge. The Nano shield can be used in various DC Motor driver applications using infra-red remote control or speed controller using trimmer potentiometer and direction control with help of slide switch. The board can drive two small size DC-Motors with current rating up […]
Programming STM32 Based Boards with the Arduino IDE
https://www.electronics-lab.com/programming-stm32-based-boards-arduino-ide/
Since it’s inception the Arduino IDE has demonstrated the desire to support all kind of platforms, from Arduino clones and variations of different manufacturers to third party boards like the ESP32 and ESp8266. As more people get familiar with the IDE, they are beginning to support more boards that are not based on ATMEL chips […]
Arduino Voltmeter using SH1106 OLED display
https://www.electronics-lab.com/arduino-voltmeter-using-sh1106-oled-display/
A voltmeter is an important tool on the workbench of every electronics hobbyist, maker or hardware design engineer. As it’s name suggests, allows the user to measure the voltage difference between two points. For today’s tutorial, we will look on how you can build an Arduino based DIY voltmeter, for use in situations where you […]
Using a 20×4 I2C Character LCD display with Arduino Uno
https://www.electronics-lab.com/using-20x4-i2c-character-lcd-display-arduino-uno/
On previous tutorials on our website, we have covered the use of several displays, LCDs, and TFTs, with diverse Arduino boards. From Nokia 5110 LCD display to different types of OLEDs, the reason for the tutorials has been to ensure that, as a reader, you know how to use many of the most popular displays […]
Norman – Arduino Library for climatic simulation of natural daylight, temperature, and humidity cycles
https://www.electronics-lab.com/norman-arduino-library-climatic-simulation-natural-daylight-temperature-humidity-cycles/
Norman is a climatic simulation library designed to run on an Arduino Uno for indoor and greenhouse automation projects. Arduino Library for mathematical climatic simulation of natural daylight, temperature, and humidity cycles using minimal data sets. Given a set of parameters for a target locale, the library returns values for temperature, dew point, Relative Humidity, […]
Multi Sensor Shield for Arduino Nano with Light, Magnetic Field & Temperature Sensor
https://www.electronics-lab.com/multi-sensor-shield-arduino-nano-light-magnetic-field-temperature-sensor/
This Arduino Nano Shield consists of a Light sensor, a Magnetic field sensor, and Temperature sensor. The shield can be used to develop various projects required light sensing, magnetic field sensing, and temperature sensing. All sensors provide analog voltage outputs, so each output is connected to analog inputs of Arduino Nano. Sensors OPT101 High Sensitive […]
Li-Po/Li-Ion Arduino Charger Shield using BQ21040
https://www.electronics-lab.com/li-po-li-ion-arduino-charger-shield-using-bq21040/
This Li-Po/Li-ion Arduino charger shield is mainly designed to power up the Arduino from single 3.6V Li-Po battery. Li-Ion and Li-Pol Charger/ DC-DC Boost converter Arduino shield provides 6.5V/400mA from single Lithium Polymer battery. The Arduino shield is equipped with BQ21040 battery charger IC and CS5171 step up DC-DC converter. The shield also has prototype […]
KB-IDE Supports Arduino, ESP32 and others in Dual Style Coding
https://www.electronics-lab.com/kbide-supports-arduino-esp32-others-dual-style-coding/
Maker Asia is an organization in South East Asia which owns Maker Lab; a place where makers put their creativity in use. They have recently released a new software product and Maker Asia, who have mostly focused on a hardware product line is eventually into a new space. The newly launched product is an open […]
Arduino Clock on IN-18 Nixie Tubes with a LONG Service Life
https://www.electronics-lab.com/arduino-clock-18-nixie-tubes-long-service-life/
Build your own Nixie tube clock/thermometer/display with ease. by Grisha Anofriev @ www.hackster.io We set out to create a Nixie clock or just an information indicator on the largest ex-Soviet IN-18 tubes as an Arduino shield-compatible with both Uno and Mega boards. After a long reading of lots of information about IN-18 tubes on the […]