Murata Electronics Type 1XK Wi-Fi®+BLUETOOTH® Module
Parts

Murata Electronics Type 1XK Wi-Fi®+BLUETOOTH® Module

Murata Electronics Type 1XK Wi-Fi®+BLUETOOTH® Module is a small and high-performance module based on the NXP IW416 combo chipset. This module offers Wi-Fi 802.11a/b/g/n, Bluetooth 5.2 BR/EDR/LE, with up to 150Mbps PHY data rate on Wi-Fi, and 3Mbps PHY data rate on Bluetooth. The...

Continue Reading
1.127
Views
0 Comments
Bluetooth Low Energy (BLE) Tutorial for Beaglebone using python
Uncategorized

Bluetooth Low Energy (BLE) Tutorial for Beaglebone using python

1. Introduction This is a simple example showcasing how to control a BleuIO dongle connected to Beaglebone Black using a python script. When running the script, it will first ask for the com port where the dongle is connected (usually '/dev/ttyACM0'). After that, BleuIO will start...

Continue Reading
1.296
Views
0 Comments
Bluetooth Low Energy (BLE) Tutorial for Arduino using BleuIO
Arduino

Bluetooth Low Energy (BLE) Tutorial for Arduino using BleuIO

1. Introduction The project is a simple example showcasing a quick way to setup an Arduino with a USB Host Shield as a USB CDC Host capable of communicating with the BleuIO Dongle. When a BleuIO Dongle is connected to the USB port, the BleuIO Dongle will start advertising. It will...

Continue Reading
1.187
Views
0 Comments
Triple-band antenna is available at Mouser
Parts

Triple-band antenna is available at Mouser

Johanson Technology 2450AD18A6050 Mini Ultra-Wide Triple Band Antenna Johanson Technology 2450AD18A6050 Mini Ultra-Wide Triple Band Antenna is a miniature BLUETOOTH®/Wi-Fi® 6E and UWB internal chip antenna that operates in the 2400MHz to 2500MHz, 4900MHz to 5850MHz, and 5850MHz to...

Continue Reading
1.095
Views
0 Comments
Create BLE project with STM32 and BleuIO
IoT

Create BLE project with STM32 and BleuIO

1. Introduction The project is a simple example showcasing a quick way to set up a STM32Cube project as a USB CDC Host capable of communicating with the BleuIO Dongle. When a BleuIO Dongle is connected to the Nucleo boards USB port the STM32 will recognize it. It will then accept 3...

Continue Reading
1.249
Views
0 Comments
Transfer files wirelessly over the Bluetooth Low Energy protocol Using BleuIO
IoT

Transfer files wirelessly over the Bluetooth Low Energy protocol Using BleuIO

This tutorial will show how to transfer files wirelessly over the Bluetooth Low Energy protocol. We will use two BleuIO dongles for this project—one for sending and another one for receiving. The sender dongle will be in central mode, while the receiver dongle will be in peripheral...

Continue Reading
2.133
Views
0 Comments
Dialog Semiconductor DA16600 Wi-Fi + BLUETOOTH Low Energy Modules
IoT

Dialog Semiconductor DA16600 Wi-Fi + BLUETOOTH Low Energy Modules

Dialog Semiconductor DA16600 Wi-Fi® + BLUETOOTH® Low Energy (BLE) Modules provide a convenient way to add both low-power Wi-Fi and low-power BLE functionality to applications. The DA16600 Modules are based on the VirtualZero™ DA16200 Wi-Fi SoC (System on a Chip) and the...

Continue Reading
2.125
Views
0 Comments
VoltLog’s CanLite is an ESP32-based CAN Bus Development Board
Mcu

VoltLog’s CanLite is an ESP32-based CAN Bus Development Board

Yet another development board featuring Espressif Systems’ powerful ESP32 microcontroller. VoltLog recently released the CanLite, a wireless CAN bus hacking, and development board built around an ESP32 microcontroller. But the CanLite was not meant to be a universal development...

Continue Reading
3.991
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives