MAX17330X22+ Standalone 1-Cell Charger, Fuel Gauge, and Protector
https://www.electronics-lab.com/max17330x22-standalone-1-cell-charger-fuel-gauge-and-protector/
Maxim’s highly integrated charger, fuel gauge, protector, and battery internal self-discharge detection IC for 1-cell lithium-ion/polymer batteries Maxim’s MAX17330 regulates charge voltage, current, and FET temperature with stand-alone charging supported by flexible configuration in nonvolatile memory. The IC supports the following applications: low-power charging including 1 mA to 500 mA directly from universal 5 V USB, high-power parallel […]
MakerPower Solar is a Portable, Intelligent Solar Power System For IoT And Remote Projects
https://www.electronics-lab.com/makerpower-solar-is-a-portable-intelligent-solar-power-system-for-iot-and-remote-projects/
A variety of solar power supplies have hit the hardware market recently. The most recent with the most desirable features is the MakerPower Solar designed by Danjuliodesigns, a Boulder, Colorado-based company to support low-cost, but high-performance IoT and remote systems. The MakerPower Solar is an intelligent solar battery charger and a 5V power supply built […]
STMicroelectronics Introduces 70 W Qi Compliant Chipsets for Ultrafast and Convenient Charging
https://www.electronics-lab.com/stmicroelectronics-introduces-70-w-qi-compliant-chipsets-for-ultrafast-and-convenient-charging/
STMicroelectronics’ STWLC98 integrated wireless power receiver delivers faster wireless charging and flexible charge sharing for diverse portable and mobile devices for home, office, industry, healthcare, and in-car applications. When combined with the STWBC2-HP transmitter IC, the complete transmitter-receiver system can deliver up to 70 W on the receiver end at high system efficiency. The STWLC98 […]
Texas Instruments bq25960 Parallel Battery Charger
https://www.electronics-lab.com/texas-instruments-bq25960-parallel-battery-charger/
Texas Instruments bq25960 Parallel Battery Charger is a 98.1% peak efficiency, 8A battery charging solution using switch capacitor architecture for a 1-cell Li-ion battery. The switched cap architecture allows the cable current to be half the charging current, reducing the cable power loss, and limiting temperature rise. The dual-phase architecture increases charging efficiency and reduces […]
E-PEAS Battery Chargers Target Wearable, Medical and Sensor Products
https://www.electronics-lab.com/e-peas-battery-chargers-target-wearable-medical-and-sensor-products/
Addressing the need for streamlined power management solutions for energy harvesting hardware, e-peas has unveiled a new family of battery charger devices. While the company’s existing power management ICs (PMICs) offer direct power delivery to the application, as well as the charging of energy storage elements (such as Li-Ion batteries or super-capacitors), the AEM10900, AEM10300 […]
Maxim Integrated MAX77301 Lithium-ion Linear Battery Charger
https://www.electronics-lab.com/maxim-integrated-max77301-lithium-ion-linear-battery-charger/
Maxim MAX77301 Lithium-ion Linear Battery Charger is JEITA-compliant and operates from a USB port, a dedicated charger, or a universal adapter. The IC provides automatic adapter-type detection and enumeration with a USB host or hub. The IC integrates an independent battery charge switch, current sense circuit, MOSFET pass elements, thermal regulation circuitry and eliminates the […]
LiFePO4 Charger Board based on CN3058E
https://www.electronics-lab.com/lifepo4-charger-board-based-on-cn3058e/
LiFePO4 Batteries: An Overview Compact electronic devices rely on concise li-ion battery packs. Lithium iron phosphate battery (LiFEPO4) or LFP battery is a type of lithium-ion battery that uses lithium iron phosphate as a cathode and a graphitic carbon electrode as the anode. LFP batteries have a lower operating voltage and also present lower electrical […]
Analog Devices LT8491 Buck-Boost Battery Charge Controller
https://www.electronics-lab.com/analog-devices-lt8491-buck-boost-battery-charge-controller/
Analog Devices Inc. LT8491 Buck-Boost Battery Charge Controller implements a constant-current constant voltage (CCCV) charging profile used for most battery types. This includes sealed lead-acid (SLA), flooded, gel, and lithium-ion. The device operates from input voltages above, below, or equal to the output voltage and is powered by a solar panel or DC power supply. Typical Application Features VIN Range: […]
BQ25171-Q1 – 800-mA linear battery charger for 1- to 2-cell Li-ion, LiFePO4, and 1- to 6-cell NiMH
https://www.electronics-lab.com/bq25171-q1-800-ma-linear-battery-charger-for-1-to-2-cell-li-ion-lifepo4-and-1-to-6-cell-nimh/
Texas Instruments bq25171-Q1 Linear Battery Charger is an automotive rated 800mA linear charger for 1-cell and 2-cell Li-Ion, Li-Polymer, and LiFePO4, in addition to 1-cell up to 6-cell NiMH battery applications. The device has a single power output that charges the battery. The system load can be placed in parallel with the battery as long […]
This MintyCharger Is Designed For All 9V PP3 Batteries In The Market
https://www.electronics-lab.com/this-mintycharger-is-designed-for-all-9v-pp3-batteries-in-the-market/
With the increase in the demand for 9V PP3 batteries, there is a significant need for an efficient charger. One might be able to find several PP3 batteries that are manufactured majority being NiMH, however, there is an alternative of Li-Ion batteries. This has made it difficult to get a suitable charger for your rechargeable […]